{"title":"Bumpers \u0026 Armor","description":"\u003cp\u003eBumpers and body armor protect your truck on the trail and add real recovery capability for winching and rigging. Tru Automotive carries the brands that build their products to actually wheel, not just look the part in a parking lot.\u003c\/p\u003e\n\u003cp\u003eOur catalog includes front bumpers from C4 Fabrication, CBI Offroad, and Dissent Offroad with proper winch capacity, factory mounting, and full bull bar or hoop options. Rear bumpers from the same brands include tire carriers, hi-lift mounting, and recovery points rated for kinetic strap loads. Skid plates protect transmission, transfer case, fuel tank, and differential from rock strikes. Rock sliders are designed for body protection and as a step, not just bolt-on cosmetic pieces. Fender flares and body armor add tire clearance and protect quarter panels and rocker panels.\u003c\/p\u003e\n\u003cp\u003eMost products in this catalog are vehicle-specific, so use the YMM filter to confirm fitment. If you are planning a build that combines bumper, sliders, and skid plates from different brands, our shop has installed every combination in the catalog and can help you avoid clearance issues.\u003c\/p\u003e","products":[{"product_id":"dobinsons-black-deluxe-gen-2-bull-bar-ford-ranger-2022-2026-bu19-5745","title":"DOBINSONS BLACK DELUXE GEN 2 BULL BAR FORD RANGER 2022-2026 – BU19-5745","description":"\u003cul\u003e\n\u003cli\u003eImpact resistant 100mm fog lights\u003c\/li\u003e\n\u003cli\u003eAirbag and winch compatible bracket\u003c\/li\u003e\n\u003cli\u003eReinforced wing sections\u003c\/li\u003e\n\u003cli\u003eCNC robotic welds\u003c\/li\u003e\n\u003cli\u003eDual aerial mounts\u003c\/li\u003e\n\u003cli\u003eReinforced dual hi-lift jacking points\u003c\/li\u003e\n\u003cli\u003eDriving light mounts\u003c\/li\u003e\n\u003cli\u003eHigh quality impact resistant L.E.D. park and indicator lights\u003c\/li\u003e\n\u003cli\u003ePolyurethane bumper protectors\u003c\/li\u003e\n\u003cli\u003eSide and centre bash plate protection kits (most models)\u003c\/li\u003e\n\u003cli\u003eHigh quality steel components\u003c\/li\u003e\n\u003cli\u003eUnique mounting system: winch mounts separate to bar to spread impact and winching loads evenly over chassis\u003c\/li\u003e\n\u003cli\u003eSplit upper and lower design to allow maximum airflow to the radiator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"Ford ranger px2 fitting instruction\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/bullbar_Installation_Guide_BU19-3542_BU19-3708_BU19-3709.pdf?v=1588357448\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003eClassic Black and Classic Black Deluxe Bull Bars are supplied with a black finish\u003c\/p\u003e\n\u003cp\u003eNOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825311498397,"sku":"BU19-5745","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/classic-black-deluxe-bull-bar-gen-2_1-981e4796.webp?v=1775856431"},{"product_id":"black-deluxe-bull-bar-for-land-cruiser-300-series-without-fog-lights-bu59-5565","title":"BLACK DELUXE BULL BAR FOR LAND CRUISER 300 SERIES – WITHOUT FOG LIGHTS – BU59-5565","description":"\u003cul\u003e\n\u003cli\u003eAirbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes Turn Signals and all Required Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eSeparate Winch Cradle System, making installation faster\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include DRL Kit, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-gen-2-bull-bar-drl-light-kit-bu80-014k\/\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCutting of the OEM front bumper is required.\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click\u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e (here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825313628317,"sku":"BU59-5565","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53474639189_27871a4b63_b__75388.1706033769__37502.1720653530.1280.1280__56725.jpg?v=1775856487"},{"product_id":"dobinsons-side-steps-with-side-rails-sr59-168","title":"DOBINSONS SIDE STEPS WITH SIDE RAILS – SR59-168","description":"\u003cul\u003e\n\u003cli\u003eHeavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e2mm Thick Main Tubes, 51mm tubes\u003c\/li\u003e\n\u003cli\u003eFully gusseted chassis mounting legs.\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop.\u003c\/li\u003e\n\u003cli\u003eFront swivel section for airbag compliance\u003c\/li\u003e\n\u003cli\u003eImages for ilustration purposes \u003cstrong\u003eONLY\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 2010-2022 Lexus GX 460 Manufactured from high quality structural steel, Dobinsons Side Steps and Rails are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. A crucial feature to help protect vital vehicle components when off-road driving.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825323229341,"sku":"SR59-168","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53187875495_56dbac2f6d__30026.jpg?v=1775856723"},{"product_id":"dobinsons-side-steps-with-side-rails-sr59-167","title":"DOBINSONS SIDE STEPS WITH SIDE RAILS – SR59-167","description":"\u003cul\u003e\n\u003cli\u003eHeavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e2mm Thick Main Tubes, 51mm tubes\u003c\/li\u003e\n\u003cli\u003eFully gusseted chassis mounting legs.\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop.\u003c\/li\u003e\n\u003cli\u003eFront swivel section for airbag compliance\u003c\/li\u003e\n\u003cli\u003eImages for ilustration purposes \u003cstrong\u003eONLY\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 2003-2009 Lexus GX 470 Manufactured from high quality structural steel, Dobinsons Side Steps and Rails are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. A crucial feature to help protect vital vehicle components when off-road driving.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825323262109,"sku":"SR59-167","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/54177641350_62d967613c_c.jpg?v=1775856723"},{"product_id":"dobinsons-side-steps-with-side-rails-sr59-165","title":"DOBINSONS SIDE STEPS WITH SIDE RAILS – SR59-165","description":"\u003cul\u003e\n\u003cli\u003eHeavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e2mm Thick Main Tubes, 51mm tubes\u003c\/li\u003e\n\u003cli\u003eFully gusseted chassis mounting legs.\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop.\u003c\/li\u003e\n\u003cli\u003eFront swivel section for airbag compliance\u003c\/li\u003e\n\u003cli\u003eImages for ilustration purposes \u003cstrong\u003eONLY\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 2008-2021 Toyota Land Cruiser 200 Series Manufactured from high quality structural steel, Dobinsons Side Steps and Rails are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. A crucial feature to help protect vital vehicle components when off-road driving.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825323327645,"sku":"SR59-165","price":1600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53659053150_44f0b265a5_b__87880.jpg?v=1775856726"},{"product_id":"dobinsons-side-steps-with-side-rails-sr59-164","title":"DOBINSONS SIDE STEPS WITH SIDE RAILS – SR59-164","description":"\u003cul\u003e\n\u003cli\u003eHeavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e2mm Thick Main Tubes, 51mm tubes\u003c\/li\u003e\n\u003cli\u003eFully gusseted chassis mounting legs.\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop.\u003c\/li\u003e\n\u003cli\u003eFront swivel section for airbag compliance\u003c\/li\u003e\n\u003cli\u003eImages for ilustration purposes \u003cstrong\u003eONLY\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 1998-2007 Toyota Land Cruiser 100 \/ 2002-2007 Lexus LX 470 Series Manufactured from high quality structural steel, Dobinsons Side Steps and Rails are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. A crucial feature to help protect vital vehicle components when off-road driving.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825323360413,"sku":"SR59-164","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53073022856_c9f6c64d35_c.jpg?v=1775856726"},{"product_id":"dobinsons-side-steps-with-side-rails-sr59-162","title":"DOBINSONS SIDE STEPS WITH SIDE RAILS – SR59-162","description":"\u003cul\u003e\n\u003cli\u003eHeavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e2mm Thick Main Tubes, 51mm tubes\u003c\/li\u003e\n\u003cli\u003eFully gusseted chassis mounting legs.\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop.\u003c\/li\u003e\n\u003cli\u003eFront swivel section for airbag compliance\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 1990 to 1997 Toyota Land Cruiser 80 series and Lexus LX450 Manufactured from high quality structural steel, Dobinsons Side Steps and Rails are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. A crucial feature to help protect vital vehicle components when off-road driving.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825323393181,"sku":"SR59-162","price":1400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/54731274778_9bc2490652_c.jpg?v=1775856728"},{"product_id":"dobinsons-rear-bar-lc-300-series-with-jerry-can-holder-and-single-tire-carrier-bw80-4145","title":"DOBINSONS REAR BAR LC 300 SERIES WITH JERRY CAN HOLDER AND SINGLE TIRE CARRIER (BW80-4145)","description":"\u003cul\u003e\n\u003cli\u003eBlack Powder Coat\u003c\/li\u003e\n\u003cli\u003eStainless Steel Latch and Hardware\u003c\/li\u003e\n\u003cli\u003eComplete Kit with Everything Included\u003c\/li\u003e\n\u003cli\u003eAll Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Tow Hitch in OE position\u003c\/li\u003e\n\u003cli\u003eAdjustable offset tire carrier head, suitable up to a 35\" tire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips to nearest freight terminal, or to commercial address with loading dock or forklift.  Home delivery not available due to pallet size\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BARLIGHT.jpg\"\u003eRear Bar Light Wiring Diagram\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328275613,"sku":"BW80-4145","price":3150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BW80-4145-1__53922.jpg?v=1775856847"},{"product_id":"rear-bar-ford-ranger-pxii-2015-with-single-wheel-carrier-and-dual-jerry-can-holder-bw80-4138","title":"REAR BAR FORD RANGER PXII 2015+ WITH SINGLE WHEEL CARRIER \u0026 DUAL JERRY CAN HOLDER (BW80-4138)","description":"\u003cul\u003e\n\u003cli\u003eComes standard as \u003cstrong\u003eBlack Powder Coat\u003c\/strong\u003e (some photos show customer”s color-matched rear bumper)\u003c\/li\u003e\n\u003cli\u003eStainless Steel Latch and Hardware\u003c\/li\u003e\n\u003cli\u003eComplete Kit with Everything Included\u003c\/li\u003e\n\u003cli\u003eAll Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Tow Hitch in OE position\u003c\/li\u003e\n\u003cli\u003eAdjustable offset tire carrier head, suitable up to a 35€³ tire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips to nearest freight terminal, or to commercial address with loading dock or forklift.  Home delivery not available due to pallet size\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BARLIGHT.jpg\"\u003eRear Bar Light Wiring Diagram\u003c\/a\u003e\n\u003c\/h2\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328308381,"sku":"BW80-4138","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/WhatsAppImage2020-07-30at9.58.17AM__07131.jpg?v=1775856847"},{"product_id":"dobinsons-rear-bumper-with-swing-outs-for-toyota-landcruiser-80-series-bw80-4134","title":"Dobinsons Rear Bumper With Swing Outs for Toyota Landcruiser 80 Series (BW80-4134)","description":"\u003cul\u003e\n\u003cli\u003eBlack Powder Coat\u003c\/li\u003e\n\u003cli\u003eStainless Steel Latch and Hardware\u003c\/li\u003e\n\u003cli\u003eComplete Kit with Everything Included\u003c\/li\u003e\n\u003cli\u003eAll Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Tow Hitch in OE position\u003c\/li\u003e\n\u003cli\u003eAdjustable offset tire carrier head, suitable up to a 35\" tire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips to nearest freight terminal, or to commercial address with loading dock or forklift.  Home delivery not available due to pallet size\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BARLIGHT.jpg\"\u003eRear Bar Light Wiring Diagram\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BW80-4134.pdf\"\u003e\u003cstrong\u003eRear Bar Schematics\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003cp\u003e - \u003cbr\u003e\nDobinsons Spring \u0026amp; Suspension USA are introducing these new Aussie-style rear bumpers to the US market for the Toyota Land Cruiser lineup. All bumpers offer the same features, and are sold as complete kits. The tire carrier and jerry can holder must stay on the side pictured, they€™re not interchangeable.  If you don”t want to install them you don”t have to, as each spindle comes with a cover, but all the parts will still be included. Product Features: €¢ Modern LED crystal park, indicator and reverse lights. All only work on 12V €¢ Does not include the jerry can €¢ Jerry can holder is on the left, and tire carrier is on the right for all models €¢ User friendly latch mechanics lock in stainless steel €¢ Adjustable offset tire carrier head, suitable up to a 35€³ tire €¢ Double-reinforced spindle, welded to the top, inside, and lower corner of the bumper for maximum strength €¢ 4 Hi-lift jacking points, making lifting the vehicle easy for changing a tire €¢ Aluminum checker plate with non-slip step €¢ High quality standard black powder coat finish €¢ All of Dobinson€™s rear bumpers work with the factory tow hitch, they do not come with a hitch. €¢ Requires trimming of lower fender flare and mud flap to tuck rear bumper into.  Does not require frame modifications €¢ Range includes Land Cruiser 60, 70, 80, 100, 200, Prado 150 series. \u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.   Home delivery is not available due to restrictions by all freight companies now and their limited liftgate service.  The product on the shipping pallet is too wide for the liftgate.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328341149,"sku":"BW80-4134","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/54598071533_fc61f434bf_c.jpg?v=1775856849"},{"product_id":"dobinsons-rear-bumper-with-swing-outs-for-toyota-landcruiser-60-series-1986-models-bw80-4132","title":"Dobinsons Rear Bumper With Swing Outs for Toyota Landcruiser 60 Series 1986+ Models (BW80-4132)","description":"\u003cul\u003e\n\u003cli\u003eLate-1985 and onwards models \u003cstrong\u003eonly\u003c\/strong\u003e due to rear cross member difference.  Using it on an earlier model will require customization on customer’s end\u003c\/li\u003e\n\u003cli\u003eComes standard as \u003cstrong\u003eBlack Powder Coat\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel Latch and Hardware\u003c\/li\u003e\n\u003cli\u003eComplete Kit with Everything Included\u003c\/li\u003e\n\u003cli\u003eAll Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Tow Hitch in OE position\u003c\/li\u003e\n\u003cli\u003eAdjustable offset tire carrier head, suitable up to a 35€³ tire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips to nearest freight terminal, or to commercial address with loading dock or forklift.  Home delivery not available due to pallet size\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BARLIGHT.jpg\"\u003eRear Bar Light Wiring Diagram\u003c\/a\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003ca title=\"BW80-4132 schematics 60 series rear bumper\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/60_SERIES_REAR_BAR_FITTING_GUIDE.pdf?v=1587666232\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cspan style=\"color: #2b00ff\"\u003e\u003cstrong style=\"color: #2b00ff;text-decoration: underline\"\u003eSchematics\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003cp\u003e - \u003cbr\u003e\nDobinsons Spring \u0026amp; Suspension USA are introducing these new Aussie-style rear bumpers to the US market for the Toyota Land Cruiser lineup. All bumpers offer the same features, and are sold as complete kits. The tire carrier and jerry can holder must stay on the side pictured, they€™re not interchangeable.  If you don”t want to install them you don”t have to, as each spindle comes with a cover, but all the parts will still be included. Product Features: €¢ Modern LED crystal park, indicator and reverse lights. All only work on 12V €¢ Does not include the jerry can €¢ Jerry can holder is on the left, and tire carrier is on the right for all models €¢ User friendly latch mechanics lock in stainless steel €¢ Adjustable offset tire carrier head, suitable up to a 35€³ tire €¢ Double-reinforced spindle, welded to the top, inside, and lower corner of the bumper for maximum strength €¢ 4 Hi-lift jacking points, making lifting the vehicle easy for changing a tire €¢ Aluminum checker plate with non-slip step €¢ High quality standard black powder coat finish €¢ All of Dobinson€™s rear bumpers work with the factory tow hitch, they do not come with a hitch. €¢ Range includes Land Cruiser 60, 70, 80, 100, 200, Prado 150 series. \u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.   Home delivery is not available due to restrictions by all freight companies now and their limited liftgate service.  The product on the shipping pallet is too wide for the liftgate.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328373917,"sku":"BW80-4132","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/60REar_2__39490_690d3db4-4206-47f7-a10a-e9cf0ba465fe.jpg?v=1775856852"},{"product_id":"dobinsons-rear-bumper-with-swing-outs-for-toyota-landcruiser-100-series-and-lexus-lx470-bw80-4109","title":"Dobinsons Rear Bumper With Swing Outs for Toyota Landcruiser 100 Series \u0026 Lexus LX470(BW80-4109)","description":"\u003cul\u003e\n\u003cli\u003eComes standard as \u003cstrong\u003eBlack Powder Coat\u003c\/strong\u003e (some photos show a customer”s color-matched rear bumper)\u003c\/li\u003e\n\u003cli\u003eStainless Steel Latch and Hardware\u003c\/li\u003e\n\u003cli\u003eComplete Kit with Everything Included\u003c\/li\u003e\n\u003cli\u003eAll Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Tow Hitch in OE position\u003c\/li\u003e\n\u003cli\u003eAdjustable offset tire carrier head, suitable up to a 35€³ tire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips to nearest freight terminal, or to commercial address with loading dock or forklift.  Home delivery not available due to pallet size\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, ''San Francisco'', ''Segoe UI'', Roboto, ''Helvetica Neue'', sans-serif;font-size: 1.4em\"\u003e\u003ca style=\"font-family: -apple-system, BlinkMacSystemFont, ''San Francisco'', ''Segoe UI'', Roboto, ''Helvetica Neue'', sans-serif;font-size: 1.4em\" title=\"100 series rear bumper installation instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BW80-4109_Instructions_1.pdf?v=1582756645\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BARLIGHT.jpg\"\u003eRear Bar Light Wiring Diagram\u003c\/a\u003e\u003c\/h2\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328406685,"sku":"BW80-4109","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/49750260186_6490afd47e_o__70701.jpg?v=1775856851"},{"product_id":"dobinsons-rear-bumper-with-swing-outs-for-toyota-landcruiser-200-series-2008-to-2019-bw80-4105","title":"Dobinsons Rear Bumper With Swing Outs for Toyota Landcruiser 200 Series 2008 to 2019 (BW80-4105)","description":"\u003cul\u003e\n\u003cli\u003eFor Toyota Land Cruiser 200 Series from 2008 to 2021.  This \u003cstrong\u003edoes not\u003c\/strong\u003e suit model with lane assist.\u003c\/li\u003e\n\u003cli\u003eCompatbile with backup sensors, but \u003cstrong\u003eNOT\u003c\/strong\u003e BSM sensors\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000\"\u003eTire Carriers and their spindles can obstruct BSM sensors and affect their functionality.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eComes standard as \u003cstrong\u003eBlack Powder Coat \u003c\/strong\u003e(customer can have his local paint shop color-match as some photos show)\u003c\/li\u003e\n\u003cli\u003eStainless Steel Latch and Hardware\u003c\/li\u003e\n\u003cli\u003eComplete Kit with Everything Included\u003c\/li\u003e\n\u003cli\u003eAll Lighting is LED 12v \u003cstrong\u003eONLY\u003c\/strong\u003e, requires splicing into original wiring harness (not plug and play)\u003c\/li\u003e\n\u003cli\u003eWorks with Factory Tow Hitch in OE position\u003c\/li\u003e\n\u003cli\u003eAdjustable offset tire carrier head, suitable up to a 35\" tire\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips to nearest freight terminal, or to commercial address with loading dock or forklift. \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003ca title=\"200 Series rear bumper schematics\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/200_SERIES_REAR_BAR_FITTING_GUIDE.pdf?v=1587661781\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eSchematics\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/dobinsonusa.com\/content\/BARLIGHT.jpg\"\u003eRear Bar Light Wiring Diagram\u003c\/a\u003e\u003c\/h2\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328439453,"sku":"BW80-4105","price":3150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/51444610273_3908a750ea_3k_2__16252-scaled.jpg?v=1775856852"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-tacoma-3rd-gen-2016-2023-with-out-fog-lights-bu59-5559","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA TACOMA 3RD GEN 2016-2023- WITH OUT FOG LIGHTS – BU59-5559","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem\"\u003eCutting of the OEM front bumper is required. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click\u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e (here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-5559_Fitting_Guide.pdf?v=1666279114\" target=\"_blank\" rel=\"noopener\"\u003eFitting Instructions\u003c\/a\u003e\u003c\/h2\u003e\n\u003cp\u003e - \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328472221,"sku":"BU59-5559","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-5559-1__17140.jpg?v=1775856854"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-tundra-2nd-gen-2014-2021-without-fog-lights-bu59-5558","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA TUNDRA 2ND GEN 2014-2021 WITHOUT FOG LIGHTS – BU59-5558","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem\"\u003eCutting of the OEM front bumper is required. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-5558_Fitting_Guide.pdf?v=1668624241\" target=\"_blank\" rel=\"noopener\"\u003eFitting Guide\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328504989,"sku":"BU59-5558","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-5558-1__28007.jpg?v=1775856855"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-4runner-5th-gen-2010-2024-without-fog-lights-bu59-5557","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA 4RUNNER 5TH GEN 2010-2024 WITHOUT FOG LIGHTS – BU59-5557","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCutting of the OEM front bumper is required. \u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca style=\"font-size: 0.875rem\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-5557_Fitting_Guide.pdf?v=1666279171\" target=\"_blank\" rel=\"noopener\"\u003eFitting Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328537757,"sku":"BU59-5557","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-5557-1__97814.jpg?v=1775856857"},{"product_id":"dobinsons-black-deluxe-bull-bar-for-toyota-land-cruiser-200-series-2016-with-halogen-fog-lights-included-bu59-5545","title":"DOBINSONS BLACK DELUXE BULL BAR FOR TOYOTA LAND CRUISER 200 SERIES 2016+ – (WITH HALOGEN FOG LIGHTS INCLUDED)  – BU59-5545","description":"\u003cul\u003e\n\u003cli\u003eAirbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes Turn Signals and all Required Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eSeparate Winch Cradle System, making installation faster\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCutting of the OEM front bumper is required.\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click\u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e (here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328570525,"sku":"BU59-5545","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/classic-black-bull-bar-gen-2_1-29636c2f-1.webp?v=1775856859"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-land-cruiser-200-series-2016-bu59-3714","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA LAND CRUISER 200 SERIES 2016+ – BU59-3714","description":"\u003cul\u003e\n\u003cli\u003eAirbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes Turn Signals and all Required Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eSeparate Winch Cradle System, making installation faster\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e**BUMPERS COME WITH BLACK POWDER COATING**\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"200 series landcruiser bullbar fitting isntructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3545_BU59-3714_and_BU59-3716_Installation_Guide.pdf?v=1588357428\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328603293,"sku":"BU59-3714","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53512543302_5e2e9da5ca_b__82432.jpg?v=1775856860"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-land-cruiser-200-series-2008-2015-bu59-3696","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA LAND CRUISER 200 SERIES 2008-2015 – BU59-3696","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"200 series bullbar fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/bu59-3533_and_bu59-3688_bu59-3696_bullbar_Installation_Guide.pdf?v=1588357437\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328636061,"sku":"BU59-3696","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-3696-1__00093.jpg?v=1775856860"},{"product_id":"dobinsons-bull-bar-ss-loop-deluxe-for-toyota-land-cruiser-80-series-and-lexus-lx450-bu59-3668","title":"DOBINSONS BULL BAR SS LOOP DELUXE FOR TOYOTA LAND CRUISER 80 SERIES \u0026 LEXUS LX450 – BU59-3668","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches.\u003c\/li\u003e\n\u003cli\u003eWILL COME WITH STAINLESS STEEL HOOPS THEY ARE REMOVEABLE as seen installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"80 Series land cruiser fitting instrucions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3518_and_BU59-3668_bullbar_Installation_Guide.pdf?v=1588357436\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull-bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull-bars are also equipped with center and side protection plates for the underside of the bull-bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328668829,"sku":"BU59-3668","price":2300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BUMPERCHROME__23367.jpg?v=1775856861"},{"product_id":"dobinsons-bull-bar-ss-loop-deluxe-for-toyota-land-cruiser-100-series-bu59-3658","title":"DOBINSONS BULL BAR SS LOOP DELUXE FOR TOYOTA LAND CRUISER 100 SERIES – BU59-3658","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals, Fog Lights and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster. Removable Top Tubes \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"100 series bullbar fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3508_BU59-3658_FITTING_GUIDE.pdf?v=1588357416\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003c\/p\u003e\n\u003cdiv id=\"descriptionAndDetails\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"feature\" data-feature-name=\"productDescription\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"a-row feature\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\"\u003e\n\u003cdiv id=\"productDescription\" class=\"a-section a-spacing-small\"\u003eManufactured from high quality structural steel, Dobinsons bull-bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features include: Airbag and winch compatible, Driving light mounts, turn signals and fog lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull-bars are also equipped with center and side protection plates for the underside of the bull-bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328701597,"sku":"BU59-3658","price":2300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-3658-1__60572.jpg?v=1775856862"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-60-series-bu59-3567","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 60 SERIES – BU59-3567","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328734365,"sku":"BU59-3567","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53132865439_239ceddff4_b__06265.jpg?v=1775856863"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-200-series-2013-2015-bu59-3533","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 200 SERIES 2013-2015 – BU59-3533","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/bu59-3533_and_bu59-3688_bu59-3696_bullbar_Installation_Guide.pdf?v=1588357437\" target=\"_blank\" title=\"200 series landcruiser fitting instructions\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003eManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328767133,"sku":"BU59-3533","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-3533-1__31035.jpg?v=1775856864"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-80-series-and-lexus-lx450-bu59-3518","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 80 SERIES \u0026 LEXUS LX450 – BU59-3518","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes\u003c\/li\u003e\n\u003cli\u003e Includes LED Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"80 series bullbar fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3518_and_BU59-3668_bullbar_Installation_Guide.pdf?v=1588357436\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 1990 to 1997 Toyota Land Cruiser 80 series and Lexus LX450 Manufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features include: Airbag and winch compatible, Driving light mounts, turn signal and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm Upper loops on Classic Black. All bumpers are supplied with a black finish. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328799901,"sku":"BU59-3518","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53458462345_da9c8d1dd5_c.jpg?v=1775856865"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-100-series-bu59-3508","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 100 SERIES – BU59-3508","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes\u003c\/li\u003e\n\u003cli\u003e Includes LED Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster. Removable Top Tubes \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches.\u003c\/li\u003e\n\u003cli\u003eTruck freight shipping is to the nearest freight terminal ONLY, or commercial address with forklift.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"lx470 and 100 series landcruiser fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3508_BU59-3658_FITTING_GUIDE.pdf?v=1588357416\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003c\/p\u003e\n\u003cdiv id=\"descriptionAndDetails\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"feature\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"a-row feature\"\u003e\n\u003cdiv id=\"productDescription\" class=\"a-section a-spacing-small\"\u003eManufactured from high quality structural steel, Dobinsons bull-bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features include: Airbag and winch compatible, Driving light mounts, turn signals, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black. All bumpers are supplied with a black finish.  Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull-bars are also equipped with center and side protection plates for the underside of the bull-bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328832669,"sku":"BU59-3508","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53658893295_238136d158_b__83865-1.jpg?v=1775856867"},{"product_id":"74-weld-ranger-raptor-skid-plate","title":"Ranger Raptor Skid Plate","description":"\u003cp\u003eHigh-clearance skid plate gaining up to 2 inches of additional front-end ground clearance. Machined 6061 aluminum tow hooks rated to 20,000 lbs. Includes custom intercooler bracket that retains factory intercooler location. Precision-folded side panels enhance rigidity. Grade 8 and zinc-coated hardware included. Includes 1 skid plate, 2 billet tow hooks, and all mounting hardware.\u003c\/p\u003e","brand":"74 Weld","offers":[{"title":"Default Title","offer_id":47826248695965,"sku":null,"price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/RR.PineValley-4.jpg?v=1775887320"},{"product_id":"copy-of-high-clearance-fender-liners-2nd-gen","title":"2005-2015 Tacoma High Clearance Fender Liners - 2nd Gen","description":"\u003cp\u003eThe 2nd Gen Tacoma High Clearance Fender Liners are built to maximize tire clearance while maintaining protection for your engine bay and door jams. Crafted from lightweight yet durable aluminum, these liners are a bolt-on upgrade with only minor drilling required, making them a practical solution for serious off-road builds.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the 2005-2015 Tacoma, the liners ensure full coverage of exposed areas while allowing room for larger tires. Edge trim provides a tight, secure seal against the fender to keep dirt, mud, and debris out, giving you both durability and a clean finish. For precision installation, fender trim templates are included to guide perfect cuts every time.\u003c\/p\u003e\n\u003cp\u003eIf you’re running a C4 Fabrication Overland or Hybrid front bumper, trimming near the flare may be required for a seamless fit. To make installation even easier, you can select the appropriate bumper caps option from the dropdown menu.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/oversized-tire-fitment-kit-2nd-gen\" title=\"OTF Kit\"\u003eClick here for the full Oversized Tire Kit\u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":47826249777309,"sku":"1200-8405-FL","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaHighClearanceFenderLinerKitCover.jpg?v=1775887465"},{"product_id":"land-cruiser-front-skid-plate-250-series-2024","title":"250 Series Land Cruiser Front Skid Plate \/ 2024-2026","description":"\u003cp\u003eProtect the vital underside of your 250 Series Land Cruiser with this heavy-duty Front Skid Plate. Designed as a direct bolt-on upgrade, it offers wide coverage that shields your engine components while working seamlessly with the factory sway-bar disconnect skid and most aftermarket bumpers.\u003c\/p\u003e\n\u003cp\u003eBuilt from 3\/16\" CNC-cut P\u0026amp;O steel, this skid plate is engineered for strength without unnecessary weight, coming in at 50 lbs. The 2-piece design includes Oil Drain and Oil Filter Covers for hassle-free maintenance, so you can service your Land Cruiser without removing the plate. All mounting hardware is included to make installation straightforward.\u003c\/p\u003e\n\u003cp\u003eFor long-term durability, select the powder-coated option or finish the raw steel before installation to prevent rust. This skid plate delivers both rugged protection and practical design for serious off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/land-cruiser-full-skid-plates-250-series-2024\"\u003eClick here for full skids\u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826250727581,"sku":"1224-50400","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826250760349,"sku":"1224-50400-01NA","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Front-Skid-Plate.jpg?v=1775887491"},{"product_id":"2nd-gen-bumper-caps","title":"2nd Gen Tacoma C4 Bumper Caps","description":"","brand":"C4 Fabrication","offers":[{"title":"Hybrid Tube Cap","offer_id":47826251055261,"sku":"1200-8405-BC-H","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Overland Plate Cap","offer_id":47826251088029,"sku":"1200-8405-BC-O","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaBumperEndCapsCover.jpg?v=1775887498"},{"product_id":"4runner-differential-skid-4th-gen-2003-2009","title":"4Runner Differential Skid \/ 4th Gen \/ 2003-2009","description":"\u003cul\u003e\n\u003cli\u003eWorks with E-locker equipped differentials\u003c\/li\u003e\n\u003cli\u003eDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16″ thick mild steel.\u003c\/li\u003e\n\u003cli\u003e100% bolt on, no drilling or cutting required.\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eShips bare steel, powder coat finish is not available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":47826252824733,"sku":"1100-5110-NK","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4runnerdifferentialskidplate2010_2aacd979-d501-4def-8855-a5c668cbd015.png?v=1775887543"},{"product_id":"4runner-differential-skid-5th-gen-2010","title":"4Runner Differential Skid \/ 5th Gen \/ 2010-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProtect one of the most vulnerable parts of your 5th Gen 4Runner with this heavy-duty differential skid plate. Designed to fit both KDSS and non-KDSS models from 2010-2024. The coverage extends forward to shield the U-joint and driveshaft yoke, keeping critical components safe on the trail.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor even more protection, you can add the optional E-locker guard to safeguard the motor. Built from 3\/16-inch thick mild steel, this skid plate offers serious durability while maintaining a precise fit. Installation is straightforward with a 100% bolt-on design, no cutting or drilling required, and all mounting hardware is included. To prevent rust, choose the powder coated option or apply your own paint or powder coat before installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No (Non-KDSS) \/ No Thanks","offer_id":47826252890269,"sku":"1100-5110-NK","price":332.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No (Non-KDSS) \/ Yes","offer_id":47826252923037,"sku":"1100-5110-NK-E","price":347.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Yes (KDSS) \/ No Thanks","offer_id":47826252955805,"sku":"1100-5110-K","price":325.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Yes (KDSS) \/ Yes","offer_id":47826252988573,"sku":"1100-5110-K-E","price":347.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No (Non-KDSS) \/ No Thanks","offer_id":47826253021341,"sku":"1100-5110-NK-01NA","price":399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No (Non-KDSS) \/ Yes","offer_id":47826253054109,"sku":"1100-5110-NK-E-01NA","price":399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Yes (KDSS) \/ No Thanks","offer_id":47826253086877,"sku":"1100-5110-K-01NA","price":399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Yes (KDSS) \/ Yes","offer_id":47826253119645,"sku":"1100-5110-K-E-01NA","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4runnerdifferentialskidplate2010_1bb2f549-dc56-4f32-b966-d39039c5d562.png?v=1775887543"},{"product_id":"6th-gen-4runner-diff-skid","title":"4Runner Differential Skid \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThe C4 Fabrication 6th Gen 4Runner Differential Skid Plate provides essential protection for one of the most vulnerable components underneath your vehicle when traveling off-road. Designed specifically for the 2025+ Toyota 4Runner, this skid plate helps shield the rear differential while also extending forward to protect the driveshaft yoke and U-joint. Keeps the diff cover from hitting a rock and breaking open.\u003c\/p\u003e\n\u003cp\u003eConstructed from 3\/16\" thick mild steel, the skid delivers reliable strength and impact resistance without excessive weight. The design mounts securely to the vehicle using the included hardware, providing a straightforward installation.\u003cbr\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826253185181,"sku":"1125-52300","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826253217949,"sku":"1125-52300-01NA","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Differential-Skid-1.jpg?v=1775887545"},{"product_id":"4runner-front-skid-plate-4th-gen-2003-2009","title":"4Runner Front Skid Plate \/ 4th Gen \/ 2003-2009","description":"\u003cul\u003e\n\u003cli\u003eWide coverage to help protect vital engine components\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" CNC cut P\u0026amp;O steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e100% Bolt-On design\u003c\/li\u003e\n\u003cli\u003eOil Drain Cover allows for easy oil changes without removing the skid plates\u003c\/li\u003e\n\u003cli\u003eWorks with 1\" diff drop\u003c\/li\u003e\n\u003cli\u003eWorks with most aftermarket bumpers\u003c\/li\u003e\n\u003cli\u003eWeighs 62lb\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eIncludes front skid plate only\u003c\/li\u003e\n\u003cli\u003eAvailable in steel only\u003c\/li\u003e\n\u003cli\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/4runner-full-skid-plates-4th-gen-2003-2009\"\u003e\u003cspan\u003eClick here for full skids\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826253480093,"sku":"1103-50100","price":549.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826253512861,"sku":"1103-50100-01NA","price":619.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGen4RunnerFrontSkidCover.jpg?v=1775887553"},{"product_id":"4runner-front-skid-plate-5th-gen-2010","title":"4Runner Front Skid Plate \/ 5th Gen \/ 2010-2024","description":"\u003cp\u003eShield your 4Runner’s undercarriage with this heavy-duty front skid plate, engineered for maximum coverage and protection of vital engine components. Built from 3\/16″ CNC-cut P\u0026amp;O steel, it delivers serious strength without unnecessary bulk. The design includes oil drain and filter access panels, making maintenance simple without the hassle of removing the skid.\u003c\/p\u003e\n\u003cp\u003eThis skid plate is 100% bolt-on, works with both KDSS and non-KDSS models, and is compatible with a 1″ diff drop as well as most aftermarket bumpers. At 62 lb, it provides solid coverage while keeping installation straightforward with all hardware included. The package includes the front skid plate only.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/4runner-full-skid-plates-5th-gen-2010\"\u003e\u003cspan\u003eClick here for full skids\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Yes - KDSS","offer_id":47826253545629,"sku":"1100-5403-K","price":549.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No - Non-KDSS","offer_id":47826253578397,"sku":"1100-5403-NK","price":549.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Yes - KDSS","offer_id":47826253611165,"sku":"1100-5403-K-01NA","price":659.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No - Non-KDSS","offer_id":47826253643933,"sku":"1100-5403-NK-01NA","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerFrontSkidPlateCover.jpg?v=1775887554"},{"product_id":"4runner-front-skid-plate-6th-gen","title":"4Runner Front Skid Plate \/ 6th Gen \/ 2025+","description":"\u003cp\u003eProtect vulnerable components of your 4Runner with our 6th Gen Front Skid Plate. Designed as a direct, 100% bolt-on upgrade, this two-piece skid plate delivers wide coverage across the underside of your truck. This shields vital engine components and the bottom of the radiator, an area left exposed on models without the TRD Off-Road package.\u003c\/p\u003e\n\u003cp\u003eMade from 3\/16\" CNC-cut P\u0026amp;O steel, the skid plate offers serious strength without excessive weight, tipping the scales at just 50 lbs. It’s compatible with SR5, TRD Sport, TRD Off-Road, and TRD Pro trims, and works seamlessly with the factory sway bar skid plate on vehicles equipped with the electronic disconnecting sway bar. The design also accommodates most aftermarket bumpers.\u003c\/p\u003e\n\u003cp\u003eMaintenance is hassle-free with integrated oil drain and oil filter covers, so you can service your 4Runner without removing the skid plate. All mounting hardware is included for a straightforward installation.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/4runner-full-skid-plates-6th-gen\" title=\"Full Skid Plates\"\u003e\u003cspan\u003eClick here for full skids\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826253709469,"sku":"1224-50400","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826253742237,"sku":"1224-50400-01NA","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Front-Skid-Plate_7d44227f-35c9-427d-8396-cbac2e5c53e7.jpg?v=1775887555"},{"product_id":"4runner-fuel-tank-skid-plate-5th-gen-2010","title":"4Runner Fuel Tank Skid Plate \/ 4th \u0026 5th Gen \/ 2003-2024","description":"\u003cp\u003eKeep your 4th \u0026amp; 5th Gen 4Runner’s fuel tank safe from trail hazards with this heavy-duty skid plate. Built from 3\/16-inch P\u0026amp;O steel plate, it provides solid bottom coverage for maximum strength and protection against rocks, ruts, and debris. Precision-cut archways on the sides allow for proper drainage without sacrificing durability.\u003c\/p\u003e\n\u003cp\u003eThis skid plate weighs 62 lbs and is designed for easy installation with a true 100% bolt-on fit, no drilling or welding required. All necessary mounting hardware is included, so you can get it installed and on the trail quickly.\u003c\/p\u003e\n\u003cp\u003eTo prevent rust, this product must be painted or powder coated before installation unless you select the powder coated option.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826253807773,"sku":"1100-5210","price":474.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826253840541,"sku":"1100-5210-01NA","price":559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerFuelTankSkidCover.jpg?v=1775887557"},{"product_id":"6th-gen-4runner-fuel-tank-skid","title":"4Runner Fuel Tank Skid Plate \/ 6th Gen \/ 2025+","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe C4 Fabrication Fuel Tank Skid Plate for the 6th Gen 4Runner is designed to provide critical protection to your fuel tank when off-road. This skid plate shields the fuel tank from rocks, trail debris, and hard impacts encountered on rough terrain.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConstructed from heavy-duty 3\/16″ P\u0026amp;O steel plate, the skid mounts directly to the vehicle’s frame for superior strength and impact resistance compared to factory protection. A solid bottom plate delivers maximum coverage where it matters most, while integrated side archways allow water, mud, and debris to drain out to prevent buildup during harsh trail conditions.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe skid plate features a 100% bolt-on design and includes all required mounting hardware, making installation straightforward with no cutting or modification required. For corrosion protection, the skid must be painted or powder coated prior to installation unless the optional powder coat finish is selected.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826253873309,"sku":"1125-51200","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826253906077,"sku":"1125-51200-01NA","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Fuel-Tank-Skid-Plate-1.jpg?v=1775887558"},{"product_id":"4runner-full-skid-plates-4th-gen-2003-2009","title":"4Runner Full Skid Plates \/ 4th Gen \/ 2003-2009","description":"\u003cp\u003eThe 4th Gen Toyota 4Runner Full Skid Plate System (2003–2009) delivers complete underbody protection with a smart, bolt-on design that requires no drilling or cutting. Engineered for serious off-road use, this setup includes three heavy-duty skid plates that bolt together to safeguard your engine, transmission, and transfer case. A unique bolt-in crossmember adds extra strength where it’s needed most, maximizing durability and protection for the transfer case.\u003c\/p\u003e\n\u003cp\u003eConstructed from 3\/16\" CNC-cut P\u0026amp;O steel, these plates are built to handle harsh impacts and rugged terrain. Wide coverage ensures vital components stay shielded, while integrated oil drain and filter covers make maintenance easy without removing the plates. At 136 pounds, the system is sturdy yet practical, and it comes with all mounting hardware for straightforward installation. Compatible with most aftermarket bumpers and 1\" diff drops, this kit includes both front and rear skid plates for complete coverage.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/c4fabrication.com\/collections\/4runner-2003-2005\/products\/4runner-fuel-tank-skid-plate-4th-gen-2003-2009\"\u003e \u003cspan\u003eClick here for Fuel Tank skid\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ V8","offer_id":47826253971613,"sku":"1103-58300","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ V6","offer_id":47826254004381,"sku":"1103-56300","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ V8","offer_id":47826254037149,"sku":"1103-58300-01NA","price":1159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ V6","offer_id":47826254069917,"sku":"1103-56300-01NA","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGen4RunnerFullSkidsCover.jpg?v=1775887560"},{"product_id":"4runner-full-skid-plates-5th-gen-2010","title":"4Runner Full Skid Plates \/ 5th Gen \/ 2010-2024","description":"\u003cp\u003eThe 5th Gen 4Runner Full Skid Plates are built for serious off-road protection, giving your rig the armor it needs to handle rugged terrain. This full set includes front and rear skid plates, designed with wide coverage to safeguard vital components like the engine, transmission, and transfer case. A unique bolt-in crossmember reinforces the setup and maximizes strength around the transfer case, where impacts are most common.\u003c\/p\u003e\n\u003cp\u003eEach skid is crafted from durable 3\/16\" CNC-cut (P\u0026amp;O) steel, offering uncompromising strength without overcomplicating installation. The 100% bolt-on design makes it straightforward to mount, while the included oil drain and oil filter access covers ensure easy maintenance—no need to remove the whole skid plate for routine oil changes.\u003c\/p\u003e\n\u003cp\u003eWeighing 136 pounds total, the system works with both KDSS and non-KDSS 4Runners, accommodates a 1\" differential drop, and is compatible with most aftermarket bumpers. All mounting hardware is included, so you’re ready to bolt on protection from front to back. If you choose to purchase these raw, you will need to paint or powder coat the plates before installation to prevent rust.\u003c\/p\u003e\n\u003cp\u003eFor the ultimate in under-body protection, add our \u003ca rel=\"noopener\" title=\"4Runner Fuel Tank Skid Plate\" href=\"https:\/\/c4fabrication.com\/products\/4runner-fuel-tank-skid-plate-5th-gen-2010\" target=\"_blank\"\u003efuel tank skid plate\u003c\/a\u003e to your order.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Yes - KDSS","offer_id":47826254200989,"sku":"1100-5403-K-KIT","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No - Non-KDSS","offer_id":47826254233757,"sku":"1100-5403-NK-KIT","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Yes - KDSS","offer_id":47826254266525,"sku":"1100-5403-K-KIT-01NA","price":1159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No - Non-KDSS","offer_id":47826254299293,"sku":"1100-5403-NK-KIT-01NA","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerFullSkidPlatesCover.jpg?v=1775887564"},{"product_id":"4runner-full-skid-plates-6th-gen","title":"4Runner Full Skid Plates \/ 6th Gen \/ 2025+","description":"\u003cp\u003eOur Full Skid Plates for the 6th Gen 4Runner are designed for complete underside coverage from the radiator to the transfer case. Built from 3\/16\" CNC-cut P\u0026amp;O steel, these plates deliver the strength you need to guard vital components from rocks, ruts, and debris. The system includes both front and rear skid plates and even shields the bottom of the radiator, which is exposed on models without the TRD Off Road package.\u003c\/p\u003e\n\u003cp\u003eOil drain and filter access covers make maintenance easy, no need to remove the skids for routine service. With a 100% bolt-on design, included hardware, and compatibility with most aftermarket bumpers, installation is straightforward and secure. Weighing in at 122 lbs, this heavy-duty armor is built to last.\u003c\/p\u003e\n\u003cp\u003eFor maximum durability, we recommend choosing the powder-coated finish. Otherwise, the steel must be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission \/ Sway Bar Disconnect Skid (If you don't know choose this one!)","offer_id":47826254364829,"sku":"1224-50600","price":1074.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission \/ Non-Sway Bar Disconnect Skid","offer_id":47826254397597,"sku":"1224-50603","price":1074.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ iForce MAX Hybrid w\/ Automatic Transmission \/ Sway Bar Disconnect Skid (If you don't know choose this one!)","offer_id":47826254430365,"sku":"1224-50602","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ iForce MAX Hybrid w\/ Automatic Transmission \/ Non-Sway Bar Disconnect Skid","offer_id":47826254463133,"sku":"1224-50604","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission \/ Sway Bar Disconnect Skid (If you don't know choose this one!)","offer_id":47826254495901,"sku":"1224-50600-01NA","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission \/ Non-Sway Bar Disconnect Skid","offer_id":47826254528669,"sku":"1224-50603-01NA","price":1199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ iForce MAX Hybrid w\/ Automatic Transmission \/ Sway Bar Disconnect Skid (If you don't know choose this one!)","offer_id":47826254561437,"sku":"1224-50602-01NA","price":1359.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ iForce MAX Hybrid w\/ Automatic Transmission \/ Non-Sway Bar Disconnect Skid","offer_id":47826254594205,"sku":"1224-50604-01NA","price":1359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Full-Skid-Plates.jpg?v=1775887564"},{"product_id":"4runner-hybrid-front-bumper-4th-gen-2003-2009","title":"4Runner Hybrid Front Bumper \/ 4th Gen \/ 2003-2009","description":"\u003cp\u003eThe 4th Gen 4Runner Hybrid Front Bumper blends strength, style, and off-road performance. Featuring a plate steel center section paired with round tube sides, this design gives your 4Runner a lighter, more aggressive look while delivering the functionality to mount a winch, 30\" light bar, and multiple fog light combinations.\u003c\/p\u003e\n\u003cp\u003eEngineered for serious off-road use, the bumper improves clearance and approach angles to make room for larger tires and tougher trails. Frame support brackets, a washer tank skid, and model-specific top fill plates for 2003-2005 are included for added durability and fitment. Depending on the year selected, turn signals are also provided.\u003c\/p\u003e\n\u003cp\u003eConstructed from 3\/16\" laser-cut P\u0026amp;O steel with 1\/4\" thick mounting plates and .120 wall, 1 3\/4\" HREW tubing, this bumper is built to handle punishing conditions. Fully welded 3\/4\" D-ring recovery tabs ensure reliable recovery points, and weight ranges from 115 lbs without a bull bar to 125 lbs with the full-height bull bar and gussets.\u003c\/p\u003e\n\u003cp\u003eThe bumper is compatible with most 8K-12K winches, including Warn Zeon and VR, Smittybilt X20, and ComeUp models. Winches with a relocated control box fit best, while integrated control box winches may require minor trimming of the grille support. It works ideally with synthetic rope and a hawse fairlead, as roller fairleads may be too large for the recessed mounting plate. Designed around 30\" single-row light bars such as the Baja Designs S8 and Heretic Studio, the bumper offers both form and function for serious trail use.\u003c\/p\u003e\n\u003cp\u003eUnless you select the powder-coated finish, this bumper will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ 2003-2005 \/ No Bull Bar","offer_id":47826254626973,"sku":"1100-3203-30-NB","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826254659741,"sku":"1100-3203-30-MH","price":1824.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254692509,"sku":"1100-3203-30-FH","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ No Bull Bar","offer_id":47826254725277,"sku":"1100-3206-30-NB","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826254758045,"sku":"1100-3206-30-MH","price":1824.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254790813,"sku":"1100-3206-30-FH","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ No Bull Bar","offer_id":47826254823581,"sku":"1100-3203-30-NB-01NA","price":1959.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826254856349,"sku":"1100-3203-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254889117,"sku":"1100-3203-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ No Bull Bar","offer_id":47826254921885,"sku":"1100-3206-30-NB-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826254954653,"sku":"1100-3206-30-MH-01NA","price":2059.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254987421,"sku":"1100-3206-30-FH-01NA","price":2159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGen4RunnerHybridBumperCover.jpg?v=1775887565"},{"product_id":"4runner-hybrid-front-bumper-5th-gen-2014","title":"4Runner Hybrid Front Bumper \/ 5th Gen \/ 2014-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 4Runner Hybrid Front Bumper for 5th Gen models (2014–2024) is a rugged, high-clearance upgrade that combines a plate steel center with tubular steel wings to improve approach angles and make room for larger tires. Designed for serious off-road use, it allows for the mounting of a winch (8k–12k), a 30” light bar, and various fog light combinations in the tube areas. Constructed from 3\/16\" laser-cut steel with 1\/4\" mounting plates and 1.75” .120 wall HREW tubing, it also includes fully welded 3\/4\" D-ring tabs for recovery. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstallation requires cutting the factory plastic bumper and replacing the power steering cooler lines with the included kit. Models from 2020 and up with Toyota Safety Sense (TSS) must select the optional TSS Relocation Bracket for compatibility, although the mid-height bull bar version does not support TSS. The bumper is not compatible with the MTM front camera unless it is relocated above the bumper. Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust. Available with optional add-ons like a washer tank skid plate, winch accessories, and light mounts, this bumper offers both protection and functionality in a trail-ready design.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826255052957,"sku":"1100-3214-30-NB","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826255085725,"sku":"1100-3214-30-MH","price":1824.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826255118493,"sku":"1100-3214-30-FH","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826255151261,"sku":"1100-3214-30-NB-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826255184029,"sku":"1100-3214-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826255216797,"sku":"1100-3214-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerHybridCover.jpg?v=1775887566"},{"product_id":"4runner-lo-pro-bumper-high-clearance-additions-5th-gen-2014","title":"4Runner Lo Pro Bumper High Clearance Additions \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSpecifically designed to pair with the C4 4Runner Lo-Pro Winch Bumper, these additions increase front-end clearance for larger tires and improve approach angles for articulation on rugged terrain. Made from durable 11-gauge steel, the HC Additions are designed for a seamless fit with no welding or drilling required. The factory plastic bumper has to be trimmed for installation. All required mounting hardware is included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-2d84438f-7fff-27a8-5e0f-0dd34fabce6e\"\u003e\u003cspan\u003e*** Please Note: \u003c\/span\u003e\u003cspan\u003eThe C4 Lo-Pro Bumper is not included. You must already have it installed or purchase one separately.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255478941,"sku":"1100-1214-HCSA","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826255511709,"sku":"1100-1214-HCSA-01NA","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerLoProHighClearanceExtensionsCover.jpg?v=1775887573"},{"product_id":"high-clearance-lo-pro-4runner","title":"4Runner Lo-Pro Bumper High Clearance Additions \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThe Lo-Pro High Clearance Additions are engineered to increase front-end clearance and improve approach angle on the 6th Gen 4Runner when paired with the C4 Fabrication Lo-Pro Winch Front Bumper. These bolt-on components provide additional tire and obstacle clearance without compromising factory features.\u003c\/p\u003e\n\u003cp\u003eConstructed from 11-gauge steel with 3\/16-inch steel mounting plates, the High Clearance Additions are designed for strength while keeping weight reasonable. The system bolts directly to the C4 Lo-Pro bumper with no drilling or welding required. OEM parking sensors are fully retained. Installation requires trimming of the factory plastic bumper.\u003c\/p\u003e\n\u003cp\u003eAll required mounting brackets and hardware are included, along with a close-out panel for the side of the bumper and a fender support bracket to ensure a clean, secure installation. Built for drivers running larger tires and tackling technical terrain, these High Clearance Additions maximize the capability of the Lo-Pro bumper while maintaining a factory-integrated fit. Unless a powder-coated option is selected, the parts must be painted or powder coated prior to installation to prevent corrosion.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255577245,"sku":"1125-10500","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826255610013,"sku":"1125-10500-01NA","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Lo-Pro-High-Clearance-Additions-1.jpg?v=1775887575"},{"product_id":"6th-gen-4runner-lo-pro-rear-bumper","title":"4Runner Lo-Pro Rear Bumper \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThe 6th Gen 2025+ Toyota 4Runner Lo-Pro Rear Bumper is engineered to provide increased rear protection and recovery capability while maintaining a clean, low-profile appearance that closely follows the factory body lines. Designed for compatibility across all trim levels, this bumper integrates seamlessly with the vehicle’s factory systems.\u003c\/p\u003e\n\u003cp\u003eConstructed for durability, the bumper utilizes an 11-gauge steel outer shell paired with 3\/16\" mounting brackets, creating a rigid structure. Fully welded 3\/4\" D-ring recovery mounts, reinforced on both the front and back sides, provide dependable recovery points. There are also recessed mounts for a pair of Baja Designs Flush S2 lights for supplemental rear lighting.\u003c\/p\u003e\n\u003cp\u003eThe Lo-Pro design preserves factory functionality, retaining OEM parking sensors and all drive assist and safety features without compromise. Installation requires trimming of the center plastic section of the factory bumper cover, allowing the steel structure to tuck tightly against the vehicle for improved clearance and a refined, integrated look. All required mounting brackets and hardware are included for installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255675549,"sku":"1125-10700","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826255708317,"sku":"1125-10700-01NA","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Lo-Pro-Rear-Bumper-1.jpg?v=1775887576"},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 5th Gen 4Runner Lo-Pro Front Bumper brings low-profile styling and hardcore off-road capability to your rig. Designed with sensor compatibility and aftermarket integration in mind, this bumper is compatible with TSS on 2020+ models, and Multi-Terrain Monitoring (MTM) systems on 2022+ vehicles. The Full Height Bull Bar does NOT interfere with TSS, however, the Mid Height Bull Bar DOES block the TSS sensor. The 2022+ TRD Sport and the 2014+ Limited trims are NOT compatible with the Lo Pro Bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEngineered to accept most 8K–12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. We recommend synthetic rope with a hawse fairlead for optimal fitment in the recessed fairlead plate. We have confirmed fitment with ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis bumper is purpose-built for 30” single-row light bars, with a fit dialed in for the Baja Designs S8, RIGID 30” SR series, and Extreme LED 30” 5D. Other light bars may vary in fitment. All required brackets and hardware are included for a seamless install. Please note that some cutting of the factory bumper is required. Whether you're building for weekend trails or daily utility, the C4 Lo-Pro Front Bumper brings the strength, style, and reliability you demand. Please note that unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826255773853,"sku":"1100-1114-30-NB","price":882.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar (WILL BLOCK TSS SENSOR)","offer_id":47826255806621,"sku":"1100-1114-30-MH","price":961.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar (WILL NOT INTERFERE WITH TSS)","offer_id":47826255839389,"sku":"1100-1114-30-FH","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826255872157,"sku":"1100-1114-30-NB-01NA","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar (WILL BLOCK TSS SENSOR)","offer_id":47826255904925,"sku":"1100-1114-30-MH-01NA","price":1099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar (WILL NOT INTERFERE WITH TSS)","offer_id":47826255937693,"sku":"1100-1114-30-FH-01NA","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerLoProCover.jpg?v=1775887579"},{"product_id":"lo-pro-4runner-winch-bumper-6th-gen","title":"4Runner Lo-Pro Winch Bumper \/ 6th Gen \/ 2025+","description":"\u003cp\u003eOur 6th Gen 4Runner Lo-Pro Winch Bumper delivers a clean, low-profile solution that integrates tightly with the factory body lines. It’s designed to add winch and lighting capability while preserving the factory look and driver-assist systems of the new 4Runner.\u003c\/p\u003e\n\u003cp\u003eThe bumper is constructed with an 11-gauge steel outer shell, and a 3\/16-inch steel winch plate and mounting brackets to handle recovery loads. ¾-inch D-ring mounts are fully welded on both the front and back sides for maximum durability. The Lo-Pro is fully compatible with TSS, front camera, parking sensors, and driver-assist features. All trims are supported, though TRD Pro and Trailhunter models require minor trimming of the front skid for clearance. Installation requires cutting the center plastic portion of the factory bumper cover.\u003c\/p\u003e\n\u003cp\u003eThis is designed specifically for a Baja Designs S8 20-inch light bar, with confirmed compatibility for the RIGID 20-inch SR Series as well. Integrated light pockets accept a pair of Baja Designs S2 fog lights. Engineered to accept most 8K-12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. Fitment has been confirmed with Warn Zeon XD 10-S \/ 12-S and Warn Evo 10-S \/ 12-S series winches. The bumper ships with all required mounting brackets and hardware. If a powder-coated option is not selected, the bumper must be painted or powder coated prior to installation to prevent corrosion.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255970461,"sku":"1125-10300","price":889.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826256003229,"sku":"1125-10300-01NA","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Lo-Pro-Bumper-1.jpg?v=1775887580"},{"product_id":"4runner-overland-series-front-bumper-4th-gen-2003-2009","title":"4Runner Overland Series Front Bumper \/ 4th Gen \/ 2003-2009","description":"\u003cp\u003eUpgrade your 4th Gen 4Runner (2003–2009) with the Overland Series Front Bumper, engineered for clearance, strength, and off-road capability. Designed to improve approach angles and make room for larger tires, this bumper is built from 3\/16″ laser-cut P\u0026amp;O steel with 1\/4″ thick frame and winch plates for uncompromising durability. Frame support brackets and a washer tank skid come standard, while fully welded 3\/4″ D-ring tabs provide dependable recovery points.\u003c\/p\u003e\n\u003cp\u003eThe bumper is winch-ready, fitting most 8k-12k winches, with the best performance from synthetic rope and a hawse fairlead. For lighting, the bumper accepts 30″ single-row light bars such as the Baja Designs S8 or Heretic Studio. Pre-drilled turn signal holes are included, with signals or caps supplied depending on year range, and a bolt-on top fill plate is provided for 2003-2005 models.\u003c\/p\u003e\n\u003cp\u003eThe Overland Series Front Bumper is available in multiple bull bar options. Bull bar tubing is made from .120 wall 1-3\/4″ diameter HREW tubing for added protection. Unless ordered with a powder coat finish, the bumper must be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ 2003-2005 \/ No Bull Bar","offer_id":47826256068765,"sku":"1100-3103-30-NB","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826256101533,"sku":"1100-3103-30-MH","price":1877.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256134301,"sku":"1100-3103-30-FH","price":1957.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ No Bull Bar","offer_id":47826256167069,"sku":"1100-3106-30-NB","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826256199837,"sku":"1100-3106-30-MH","price":1877.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256232605,"sku":"1100-3106-30-FH","price":1957.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ No Bull Bar","offer_id":47826256265373,"sku":"1100-3103-30-NB-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826256298141,"sku":"1100-3103-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256330909,"sku":"1100-3103-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ No Bull Bar","offer_id":47826256363677,"sku":"1100-3106-30-NB-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826256396445,"sku":"1100-3106-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256429213,"sku":"1100-3106-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGen4RunnerOverlandBumperCover.jpg?v=1775887582"},{"product_id":"4runner-overland-series-front-bumper-5th-gen-2014","title":"4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Overland Series Front Bumper for the 2014–2024 Toyota 4Runner is built for serious off-road performance and added front-end protection. Designed to improve approach angles and offer greater clearance for larger tires, this bumper enhances your 4Runner’s trail capabilities without sacrificing durability or style. It’s constructed from 3\/16″ laser-cut P\u0026amp;O steel, with 1\/4″ thick mounting plates for solid frame attachment. For added recovery strength, every bumper includes fully welded 3\/4″ D-ring tabs, reinforced from both the front and back.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptional bull bar configurations offer further protection and are made from .120 wall, 1 3\/4″ diameter HREW tubing. If your 4Runner is equipped with Toyota’s TSS system, selecting the TSS relocation bracket is necessary. Please note that the mid-height bull bar is not compatible with TSS. The bumper is also not compatible with the factory MTM front camera unless the camera is relocated above the bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWinch compatibility is a key feature of this bumper. It fits most 8k–12k winches, ideally those that allow for the relocation of the electrical control box. Some integrated control box winches may require trimming of the grille support brackets for proper fitment. Common winches like the ComeUp, Smittybilt X20, and Warn Zeon and VR series have been confirmed to fit. We recommend synthetic rope and a hawse-style fairlead. Some roller fairleads may not fit the recessed mounting plate.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Overland Series Front Bumper is also ready for lighting upgrades. It’s designed to fit most 30″ single-row light bars, with specific compatibility for the Baja Designs S8, RIGID 30″ SR series, and Extreme LED 30″ 5D models. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAdditionally, this bumper comes with a power steering cooler kit to replace the factory steel cooler lines. This not only creates more room for winch installation but also eliminates the vulnerable U-shaped portion of the lines near the frame. The replacement process is straightforward and does not require draining the power steering system. The result is a more protected and trail-ready setup for your 4Runner.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826256461981,"sku":"1100-3114-30-NB","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826256494749,"sku":"1100-3114-30-MH","price":1877.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826256527517,"sku":"1100-3114-30-FH","price":1957.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826256560285,"sku":"1100-3114-30-FHH","price":2006.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826256593053,"sku":"1100-3114-30-NB-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826256625821,"sku":"1100-3114-30-MH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826256658589,"sku":"1100-3114-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826256691357,"sku":"1100-3114-30-FHH-01NA","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerOverlandFrontCover.jpg?v=1775887584"},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe C4 5th Gen 4Runner Overland Series Rear Bumper is a full replacement, no-cut design for your 2010-2024 4Runner. It includes a license plate mount kit with light, all necessary hardware, and retains the camera functionality. Each swing out variation comes with a camp table, holes for CB antennas, and zip tie tabs for easy routing of wires.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBuilt with internal bracing throughout the main structure, the bumper resists twist and sag, even with fully loaded swing-outs. The swing-out arms are compatible with tires up to 35” and feature multiple mounting hole patterns to accommodate a variety of off-road accessories like jerry cans, hi-lift jack, and recovery gear. Heavy-duty latching systems are easy to operate and dramatically reduce swing-arm movement, outperforming other systems on the market.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper’s mounting system allows for full adjustability in every direction, ensuring a perfect fit and even body lines. Lightweight steel filler panels attach below each taillight, eliminating gaps and completing the clean, custom look. The design is compatible with the C4 Summit hatch ladder and GOBI ladder (excluding TRD Pro GOBI).\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ None - Swing Arms CANNOT be added later","offer_id":47826256789661,"sku":"1100-4110-NS","price":2499.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Half Length Swing Arm - Passenger side pivot (Includes Tire Carrier)","offer_id":47826256822429,"sku":"1100-4110-HALF","price":3323.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Single Full Length Swing Arm (Includes Tire Carrier) - Passenger side pivot","offer_id":47826256855197,"sku":"1100-4110-SINGLE-P","price":3498.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Dual Swing Arms (Includes Tire Carrier)","offer_id":47826256887965,"sku":"1100-4110-DUAL","price":3988.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ None - Swing Arms CANNOT be added later","offer_id":47826256920733,"sku":"1100-4110-NS-01NA","price":2799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Half Length Swing Arm - Passenger side pivot (Includes Tire Carrier)","offer_id":47826256953501,"sku":"1100-4110-HALF-01NA","price":3759.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Single Full Length Swing Arm (Includes Tire Carrier) - Passenger side pivot","offer_id":47826256986269,"sku":"1100-4110-SINGLE-P-01NA","price":3999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Dual Swing Arms (Includes Tire Carrier)","offer_id":47826257019037,"sku":"1100-4110-DUAL-01NA","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerOverlandRearCovera.jpg?v=1775887585"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/collections\/2nd-Gen-Tacoma-Bushmaster-Rear-Bumper213.jpg?v=1776122796","url":"https:\/\/truautomotive.com\/collections\/bumpers-armor.oembed?page=12","provider":"TRU Automotive","version":"1.0","type":"link"}