{"title":"Front Bumpers","description":"\u003cp\u003eFront bumpers protect the front of your truck and add winch and recovery capability. Tru Automotive carries front bumpers from C4 Fabrication, CBI Offroad, Dissent Offroad, and other brands designed specifically for off-road use.\u003c\/p\u003e\n\u003cp\u003eLo-Pro winch bumpers integrate a winch behind a low-profile bumper that preserves approach angle and visibility. Hi-Lite bumpers add full bull bar or hoop protection for brush, branches, and animal strikes. Most aftermarket front bumpers ship with proper recovery point integration, fog light cutouts, and provisions for auxiliary lighting and sensor relocation.\u003c\/p\u003e\n\u003cp\u003eFront bumpers are vehicle-specific. Use the YMM filter to confirm fitment. If you are running a complete bumper, slider, and skid plate build from a single brand, the catalog is designed to integrate, but cross-brand combinations sometimes need clearance work.\u003c\/p\u003e","products":[{"product_id":"dobinsons-black-deluxe-gen-2-bull-bar-ford-ranger-2022-2026-bu19-5745","title":"DOBINSONS BLACK DELUXE GEN 2 BULL BAR FORD RANGER 2022-2026 – BU19-5745","description":"\u003cul\u003e\n\u003cli\u003eImpact resistant 100mm fog lights\u003c\/li\u003e\n\u003cli\u003eAirbag and winch compatible bracket\u003c\/li\u003e\n\u003cli\u003eReinforced wing sections\u003c\/li\u003e\n\u003cli\u003eCNC robotic welds\u003c\/li\u003e\n\u003cli\u003eDual aerial mounts\u003c\/li\u003e\n\u003cli\u003eReinforced dual hi-lift jacking points\u003c\/li\u003e\n\u003cli\u003eDriving light mounts\u003c\/li\u003e\n\u003cli\u003eHigh quality impact resistant L.E.D. park and indicator lights\u003c\/li\u003e\n\u003cli\u003ePolyurethane bumper protectors\u003c\/li\u003e\n\u003cli\u003eSide and centre bash plate protection kits (most models)\u003c\/li\u003e\n\u003cli\u003eHigh quality steel components\u003c\/li\u003e\n\u003cli\u003eUnique mounting system: winch mounts separate to bar to spread impact and winching loads evenly over chassis\u003c\/li\u003e\n\u003cli\u003eSplit upper and lower design to allow maximum airflow to the radiator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"Ford ranger px2 fitting instruction\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/bullbar_Installation_Guide_BU19-3542_BU19-3708_BU19-3709.pdf?v=1588357448\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003eClassic Black and Classic Black Deluxe Bull Bars are supplied with a black finish\u003c\/p\u003e\n\u003cp\u003eNOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825311498397,"sku":"BU19-5745","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/classic-black-deluxe-bull-bar-gen-2_1-981e4796.webp?v=1775856431"},{"product_id":"black-deluxe-bull-bar-for-land-cruiser-300-series-without-fog-lights-bu59-5565","title":"BLACK DELUXE BULL BAR FOR LAND CRUISER 300 SERIES – WITHOUT FOG LIGHTS – BU59-5565","description":"\u003cul\u003e\n\u003cli\u003eAirbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes Turn Signals and all Required Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eSeparate Winch Cradle System, making installation faster\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not include DRL Kit, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-gen-2-bull-bar-drl-light-kit-bu80-014k\/\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCutting of the OEM front bumper is required.\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click\u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e (here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825313628317,"sku":"BU59-5565","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53474639189_27871a4b63_b__75388.1706033769__37502.1720653530.1280.1280__56725.jpg?v=1775856487"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-tacoma-3rd-gen-2016-2023-with-out-fog-lights-bu59-5559","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA TACOMA 3RD GEN 2016-2023- WITH OUT FOG LIGHTS – BU59-5559","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem\"\u003eCutting of the OEM front bumper is required. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click\u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e (here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-5559_Fitting_Guide.pdf?v=1666279114\" target=\"_blank\" rel=\"noopener\"\u003eFitting Instructions\u003c\/a\u003e\u003c\/h2\u003e\n\u003cp\u003e - \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328472221,"sku":"BU59-5559","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-5559-1__17140.jpg?v=1775856854"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-tundra-2nd-gen-2014-2021-without-fog-lights-bu59-5558","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA TUNDRA 2ND GEN 2014-2021 WITHOUT FOG LIGHTS – BU59-5558","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem\"\u003eCutting of the OEM front bumper is required. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-5558_Fitting_Guide.pdf?v=1668624241\" target=\"_blank\" rel=\"noopener\"\u003eFitting Guide\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328504989,"sku":"BU59-5558","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-5558-1__28007.jpg?v=1775856855"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-4runner-5th-gen-2010-2024-without-fog-lights-bu59-5557","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA 4RUNNER 5TH GEN 2010-2024 WITHOUT FOG LIGHTS – BU59-5557","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCutting of the OEM front bumper is required. \u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca style=\"font-size: 0.875rem\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-5557_Fitting_Guide.pdf?v=1666279171\" target=\"_blank\" rel=\"noopener\"\u003eFitting Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003c\/h1\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328537757,"sku":"BU59-5557","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-5557-1__97814.jpg?v=1775856857"},{"product_id":"dobinsons-black-deluxe-bull-bar-for-toyota-land-cruiser-200-series-2016-with-halogen-fog-lights-included-bu59-5545","title":"DOBINSONS BLACK DELUXE BULL BAR FOR TOYOTA LAND CRUISER 200 SERIES 2016+ – (WITH HALOGEN FOG LIGHTS INCLUDED)  – BU59-5545","description":"\u003cul\u003e\n\u003cli\u003eAirbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes Turn Signals and all Required Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eSeparate Winch Cradle System, making installation faster\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003eDoes not include Fog Lights, Purchase \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-fog-light-kit-bu80-020k-bu80-020k\/\" target=\"_blank\" rel=\"noopener\"\u003e(here)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCutting of the OEM front bumper is required.\u003c\/li\u003e\n\u003cli\u003eTo purchase Zenith Spot Lights click\u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-zenith-155-watt-led-driving-light-pair-with-12700-raw-lumens\/\" target=\"_blank\" rel=\"noopener\"\u003e (here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequires Dobinsons Fairlead, to purchase click \u003ca href=\"https:\/\/dobinsonusa.com\/products\/dobinsons-4x4-offset-winch-fairlead-ew80-3824\/\" target=\"_blank\" rel=\"noopener\"\u003e(Here) \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e - \u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328570525,"sku":"BU59-5545","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/classic-black-bull-bar-gen-2_1-29636c2f-1.webp?v=1775856859"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-land-cruiser-200-series-2016-bu59-3714","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA LAND CRUISER 200 SERIES 2016+ – BU59-3714","description":"\u003cul\u003e\n\u003cli\u003eAirbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish\u003c\/li\u003e\n\u003cli\u003e3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle\u003c\/li\u003e\n\u003cli\u003eIncludes Turn Signals and all Required Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eSeparate Winch Cradle System, making installation faster\u003c\/li\u003e\n\u003cli\u003eSupplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e**BUMPERS COME WITH BLACK POWDER COATING**\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"200 series landcruiser bullbar fitting isntructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3545_BU59-3714_and_BU59-3716_Installation_Guide.pdf?v=1588357428\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328603293,"sku":"BU59-3714","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53512543302_5e2e9da5ca_b__82432.jpg?v=1775856860"},{"product_id":"dobinsons-bull-bar-black-deluxe-for-toyota-land-cruiser-200-series-2008-2015-bu59-3696","title":"DOBINSONS BULL BAR BLACK DELUXE FOR TOYOTA LAND CRUISER 200 SERIES 2008-2015 – BU59-3696","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"200 series bullbar fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/bu59-3533_and_bu59-3688_bu59-3696_bullbar_Installation_Guide.pdf?v=1588357437\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328636061,"sku":"BU59-3696","price":2150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-3696-1__00093.jpg?v=1775856860"},{"product_id":"dobinsons-bull-bar-ss-loop-deluxe-for-toyota-land-cruiser-80-series-and-lexus-lx450-bu59-3668","title":"DOBINSONS BULL BAR SS LOOP DELUXE FOR TOYOTA LAND CRUISER 80 SERIES \u0026 LEXUS LX450 – BU59-3668","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches.\u003c\/li\u003e\n\u003cli\u003eWILL COME WITH STAINLESS STEEL HOOPS THEY ARE REMOVEABLE as seen installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"80 Series land cruiser fitting instrucions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3518_and_BU59-3668_bullbar_Installation_Guide.pdf?v=1588357436\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull-bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull-bars are also equipped with center and side protection plates for the underside of the bull-bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328668829,"sku":"BU59-3668","price":2300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BUMPERCHROME__23367.jpg?v=1775856861"},{"product_id":"dobinsons-bull-bar-ss-loop-deluxe-for-toyota-land-cruiser-100-series-bu59-3658","title":"DOBINSONS BULL BAR SS LOOP DELUXE FOR TOYOTA LAND CRUISER 100 SERIES – BU59-3658","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals, Fog Lights and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster. Removable Top Tubes \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"100 series bullbar fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3508_BU59-3658_FITTING_GUIDE.pdf?v=1588357416\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003c\/p\u003e\n\u003cdiv id=\"descriptionAndDetails\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"feature\" data-feature-name=\"productDescription\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"a-row feature\" data-feature-name=\"productDescription\" data-template-name=\"productDescription\"\u003e\n\u003cdiv id=\"productDescription\" class=\"a-section a-spacing-small\"\u003eManufactured from high quality structural steel, Dobinsons bull-bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features include: Airbag and winch compatible, Driving light mounts, turn signals and fog lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull-bars are also equipped with center and side protection plates for the underside of the bull-bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328701597,"sku":"BU59-3658","price":2300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-3658-1__60572.jpg?v=1775856862"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-60-series-bu59-3567","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 60 SERIES – BU59-3567","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328734365,"sku":"BU59-3567","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53132865439_239ceddff4_b__06265.jpg?v=1775856863"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-200-series-2013-2015-bu59-3533","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 200 SERIES 2013-2015 – BU59-3533","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle \u003c\/li\u003e\n\u003cli\u003e Includes Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/bu59-3533_and_bu59-3688_bu59-3696_bullbar_Installation_Guide.pdf?v=1588357437\" target=\"_blank\" title=\"200 series landcruiser fitting instructions\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003eManufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features vary by bumper model, but may include: Airbag and winch compatible, Driving light mounts, turn signal (Deluxe and Stainless bumpers only) and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Polyurethane bumper overiders (deluxe and Stainless bumpers only), Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black and Classic Black Deluxe (60mm Land Cruiser 200 Series), 76mm center loop and 51mm side loops on Stainless Loop Deluxe models. All bumpers are supplied with a black finish. Stainless Loop Deluxe Bull Bars are supplied with a black finish and stainless steel loops. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328767133,"sku":"BU59-3533","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/BU59-3533-1__31035.jpg?v=1775856864"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-80-series-and-lexus-lx450-bu59-3518","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 80 SERIES \u0026 LEXUS LX450 – BU59-3518","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes\u003c\/li\u003e\n\u003cli\u003e Includes LED Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShipping to nearest freight terminal only or Commercial address with dock or forklift available.  \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"80 series bullbar fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3518_and_BU59-3668_bullbar_Installation_Guide.pdf?v=1588357436\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003cbr\u003e\nFor 1990 to 1997 Toyota Land Cruiser 80 series and Lexus LX450 Manufactured from high quality structural steel, Dobinsons bull bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features include: Airbag and winch compatible, Driving light mounts, turn signal and parking lights, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm Upper loops on Classic Black. All bumpers are supplied with a black finish. Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull bars are also equipped with center and side protection plates for the underside of the bull bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/p\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328799901,"sku":"BU59-3518","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53458462345_da9c8d1dd5_c.jpg?v=1775856865"},{"product_id":"dobinsons-bull-bar-classic-black-for-toyota-land-cruiser-100-series-bu59-3508","title":"DOBINSONS BULL BAR CLASSIC BLACK FOR TOYOTA LAND CRUISER 100 SERIES – BU59-3508","description":"\u003cul\u003e\n\u003cli\u003e Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish \u003c\/li\u003e\n\u003cli\u003e 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes\u003c\/li\u003e\n\u003cli\u003e Includes LED Turn Signals and all Required Hardware for Installation \u003c\/li\u003e\n\u003cli\u003e Separate Winch Cradle System, making installation faster. Removable Top Tubes \u003c\/li\u003e\n\u003cli\u003e Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches.\u003c\/li\u003e\n\u003cli\u003eTruck freight shipping is to the nearest freight terminal ONLY, or commercial address with forklift.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003ca title=\"lx470 and 100 series landcruiser fitting instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/2795\/1981\/files\/BU59-3508_BU59-3658_FITTING_GUIDE.pdf?v=1588357416\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"text-decoration: underline\"\u003e\u003cstrong\u003eFitting Instructions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e - \u003c\/p\u003e\n\u003cdiv id=\"descriptionAndDetails\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"feature\"\u003e\n\u003cdiv id=\"productDescription_feature_div\" class=\"a-row feature\"\u003e\n\u003cdiv id=\"productDescription\" class=\"a-section a-spacing-small\"\u003eManufactured from high quality structural steel, Dobinsons bull-bars are CNC cut, bent and welded for accurate fitment, optimum strength and durability. Features include: Airbag and winch compatible, Driving light mounts, turn signals, Heavy duty black powder-coat finish, Dual re-enforced hi-lift jacking points, Dual aerial mounts, Re-enforced bull-bar wing tips, Separate winch cradle to chassis mounting system allows excess weight and load to be supported directly by the chassis, 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates (some models may not come with these), 51mm Upper loops on Classic Black. All bumpers are supplied with a black finish.  Some photos show painted bumpers on show vehicles for photography purposes. Color matching can be performed by your local automotive spray painter. Due to the additional weight when fitting a Bull Bar and\/or Winch, the vehicle€â™s ride height will be lowered. We suggest replacing the springs with a matched pair of springs to suit the requirement. Most bull-bars are also equipped with center and side protection plates for the underside of the bull-bar. A crucial feature to help protect vital vehicle components when off-road driving. Separate winch cradle to chassis mounting system allows the additional weight of the winch and winching load to be supported directly by the chassis. NOTE: Contact us for accurate information on bumper specifics before ordering if you have questions. Returned shipments will incur additional shipping and handling charges.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Dobinsons","offers":[{"title":"Default Title","offer_id":47825328832669,"sku":"BU59-3508","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/53658893295_238136d158_b__83865-1.jpg?v=1775856867"},{"product_id":"2nd-gen-bumper-caps","title":"2nd Gen Tacoma C4 Bumper Caps","description":"","brand":"C4 Fabrication","offers":[{"title":"Hybrid Tube Cap","offer_id":47826251055261,"sku":"1200-8405-BC-H","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Overland Plate Cap","offer_id":47826251088029,"sku":"1200-8405-BC-O","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaBumperEndCapsCover.jpg?v=1775887498"},{"product_id":"4runner-hybrid-front-bumper-4th-gen-2003-2009","title":"4Runner Hybrid Front Bumper \/ 4th Gen \/ 2003-2009","description":"\u003cp\u003eThe 4th Gen 4Runner Hybrid Front Bumper blends strength, style, and off-road performance. Featuring a plate steel center section paired with round tube sides, this design gives your 4Runner a lighter, more aggressive look while delivering the functionality to mount a winch, 30\" light bar, and multiple fog light combinations.\u003c\/p\u003e\n\u003cp\u003eEngineered for serious off-road use, the bumper improves clearance and approach angles to make room for larger tires and tougher trails. Frame support brackets, a washer tank skid, and model-specific top fill plates for 2003-2005 are included for added durability and fitment. Depending on the year selected, turn signals are also provided.\u003c\/p\u003e\n\u003cp\u003eConstructed from 3\/16\" laser-cut P\u0026amp;O steel with 1\/4\" thick mounting plates and .120 wall, 1 3\/4\" HREW tubing, this bumper is built to handle punishing conditions. Fully welded 3\/4\" D-ring recovery tabs ensure reliable recovery points, and weight ranges from 115 lbs without a bull bar to 125 lbs with the full-height bull bar and gussets.\u003c\/p\u003e\n\u003cp\u003eThe bumper is compatible with most 8K-12K winches, including Warn Zeon and VR, Smittybilt X20, and ComeUp models. Winches with a relocated control box fit best, while integrated control box winches may require minor trimming of the grille support. It works ideally with synthetic rope and a hawse fairlead, as roller fairleads may be too large for the recessed mounting plate. Designed around 30\" single-row light bars such as the Baja Designs S8 and Heretic Studio, the bumper offers both form and function for serious trail use.\u003c\/p\u003e\n\u003cp\u003eUnless you select the powder-coated finish, this bumper will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ 2003-2005 \/ No Bull Bar","offer_id":47826254626973,"sku":"1100-3203-30-NB","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826254659741,"sku":"1100-3203-30-MH","price":1824.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254692509,"sku":"1100-3203-30-FH","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ No Bull Bar","offer_id":47826254725277,"sku":"1100-3206-30-NB","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826254758045,"sku":"1100-3206-30-MH","price":1824.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254790813,"sku":"1100-3206-30-FH","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ No Bull Bar","offer_id":47826254823581,"sku":"1100-3203-30-NB-01NA","price":1959.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826254856349,"sku":"1100-3203-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254889117,"sku":"1100-3203-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ No Bull Bar","offer_id":47826254921885,"sku":"1100-3206-30-NB-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826254954653,"sku":"1100-3206-30-MH-01NA","price":2059.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826254987421,"sku":"1100-3206-30-FH-01NA","price":2159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGen4RunnerHybridBumperCover.jpg?v=1775887565"},{"product_id":"4runner-hybrid-front-bumper-5th-gen-2014","title":"4Runner Hybrid Front Bumper \/ 5th Gen \/ 2014-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 4Runner Hybrid Front Bumper for 5th Gen models (2014–2024) is a rugged, high-clearance upgrade that combines a plate steel center with tubular steel wings to improve approach angles and make room for larger tires. Designed for serious off-road use, it allows for the mounting of a winch (8k–12k), a 30” light bar, and various fog light combinations in the tube areas. Constructed from 3\/16\" laser-cut steel with 1\/4\" mounting plates and 1.75” .120 wall HREW tubing, it also includes fully welded 3\/4\" D-ring tabs for recovery. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstallation requires cutting the factory plastic bumper and replacing the power steering cooler lines with the included kit. Models from 2020 and up with Toyota Safety Sense (TSS) must select the optional TSS Relocation Bracket for compatibility, although the mid-height bull bar version does not support TSS. The bumper is not compatible with the MTM front camera unless it is relocated above the bumper. Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust. Available with optional add-ons like a washer tank skid plate, winch accessories, and light mounts, this bumper offers both protection and functionality in a trail-ready design.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826255052957,"sku":"1100-3214-30-NB","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826255085725,"sku":"1100-3214-30-MH","price":1824.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826255118493,"sku":"1100-3214-30-FH","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826255151261,"sku":"1100-3214-30-NB-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826255184029,"sku":"1100-3214-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826255216797,"sku":"1100-3214-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerHybridCover.jpg?v=1775887566"},{"product_id":"4runner-lo-pro-bumper-high-clearance-additions-5th-gen-2014","title":"4Runner Lo Pro Bumper High Clearance Additions \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSpecifically designed to pair with the C4 4Runner Lo-Pro Winch Bumper, these additions increase front-end clearance for larger tires and improve approach angles for articulation on rugged terrain. Made from durable 11-gauge steel, the HC Additions are designed for a seamless fit with no welding or drilling required. The factory plastic bumper has to be trimmed for installation. All required mounting hardware is included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-2d84438f-7fff-27a8-5e0f-0dd34fabce6e\"\u003e\u003cspan\u003e*** Please Note: \u003c\/span\u003e\u003cspan\u003eThe C4 Lo-Pro Bumper is not included. You must already have it installed or purchase one separately.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255478941,"sku":"1100-1214-HCSA","price":599.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826255511709,"sku":"1100-1214-HCSA-01NA","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerLoProHighClearanceExtensionsCover.jpg?v=1775887573"},{"product_id":"high-clearance-lo-pro-4runner","title":"4Runner Lo-Pro Bumper High Clearance Additions \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThe Lo-Pro High Clearance Additions are engineered to increase front-end clearance and improve approach angle on the 6th Gen 4Runner when paired with the C4 Fabrication Lo-Pro Winch Front Bumper. These bolt-on components provide additional tire and obstacle clearance without compromising factory features.\u003c\/p\u003e\n\u003cp\u003eConstructed from 11-gauge steel with 3\/16-inch steel mounting plates, the High Clearance Additions are designed for strength while keeping weight reasonable. The system bolts directly to the C4 Lo-Pro bumper with no drilling or welding required. OEM parking sensors are fully retained. Installation requires trimming of the factory plastic bumper.\u003c\/p\u003e\n\u003cp\u003eAll required mounting brackets and hardware are included, along with a close-out panel for the side of the bumper and a fender support bracket to ensure a clean, secure installation. Built for drivers running larger tires and tackling technical terrain, these High Clearance Additions maximize the capability of the Lo-Pro bumper while maintaining a factory-integrated fit. Unless a powder-coated option is selected, the parts must be painted or powder coated prior to installation to prevent corrosion.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255577245,"sku":"1125-10500","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826255610013,"sku":"1125-10500-01NA","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Lo-Pro-High-Clearance-Additions-1.jpg?v=1775887575"},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 5th Gen 4Runner Lo-Pro Front Bumper brings low-profile styling and hardcore off-road capability to your rig. Designed with sensor compatibility and aftermarket integration in mind, this bumper is compatible with TSS on 2020+ models, and Multi-Terrain Monitoring (MTM) systems on 2022+ vehicles. The Full Height Bull Bar does NOT interfere with TSS, however, the Mid Height Bull Bar DOES block the TSS sensor. The 2022+ TRD Sport and the 2014+ Limited trims are NOT compatible with the Lo Pro Bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEngineered to accept most 8K–12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. We recommend synthetic rope with a hawse fairlead for optimal fitment in the recessed fairlead plate. We have confirmed fitment with ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis bumper is purpose-built for 30” single-row light bars, with a fit dialed in for the Baja Designs S8, RIGID 30” SR series, and Extreme LED 30” 5D. Other light bars may vary in fitment. All required brackets and hardware are included for a seamless install. Please note that some cutting of the factory bumper is required. Whether you're building for weekend trails or daily utility, the C4 Lo-Pro Front Bumper brings the strength, style, and reliability you demand. Please note that unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826255773853,"sku":"1100-1114-30-NB","price":882.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar (WILL BLOCK TSS SENSOR)","offer_id":47826255806621,"sku":"1100-1114-30-MH","price":961.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar (WILL NOT INTERFERE WITH TSS)","offer_id":47826255839389,"sku":"1100-1114-30-FH","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826255872157,"sku":"1100-1114-30-NB-01NA","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar (WILL BLOCK TSS SENSOR)","offer_id":47826255904925,"sku":"1100-1114-30-MH-01NA","price":1099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar (WILL NOT INTERFERE WITH TSS)","offer_id":47826255937693,"sku":"1100-1114-30-FH-01NA","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerLoProCover.jpg?v=1775887579"},{"product_id":"lo-pro-4runner-winch-bumper-6th-gen","title":"4Runner Lo-Pro Winch Bumper \/ 6th Gen \/ 2025+","description":"\u003cp\u003eOur 6th Gen 4Runner Lo-Pro Winch Bumper delivers a clean, low-profile solution that integrates tightly with the factory body lines. It’s designed to add winch and lighting capability while preserving the factory look and driver-assist systems of the new 4Runner.\u003c\/p\u003e\n\u003cp\u003eThe bumper is constructed with an 11-gauge steel outer shell, and a 3\/16-inch steel winch plate and mounting brackets to handle recovery loads. ¾-inch D-ring mounts are fully welded on both the front and back sides for maximum durability. The Lo-Pro is fully compatible with TSS, front camera, parking sensors, and driver-assist features. All trims are supported, though TRD Pro and Trailhunter models require minor trimming of the front skid for clearance. Installation requires cutting the center plastic portion of the factory bumper cover.\u003c\/p\u003e\n\u003cp\u003eThis is designed specifically for a Baja Designs S8 20-inch light bar, with confirmed compatibility for the RIGID 20-inch SR Series as well. Integrated light pockets accept a pair of Baja Designs S2 fog lights. Engineered to accept most 8K-12K winches, the Lo-Pro makes recovery-ready look clean and purposeful. Winches with relocatable control boxes fit best, while some integrated models may require minor trimming. Fitment has been confirmed with Warn Zeon XD 10-S \/ 12-S and Warn Evo 10-S \/ 12-S series winches. The bumper ships with all required mounting brackets and hardware. If a powder-coated option is not selected, the bumper must be painted or powder coated prior to installation to prevent corrosion.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826255970461,"sku":"1125-10300","price":889.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826256003229,"sku":"1125-10300-01NA","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/6th-Gen-4Runner-Lo-Pro-Bumper-1.jpg?v=1775887580"},{"product_id":"4runner-overland-series-front-bumper-4th-gen-2003-2009","title":"4Runner Overland Series Front Bumper \/ 4th Gen \/ 2003-2009","description":"\u003cp\u003eUpgrade your 4th Gen 4Runner (2003–2009) with the Overland Series Front Bumper, engineered for clearance, strength, and off-road capability. Designed to improve approach angles and make room for larger tires, this bumper is built from 3\/16″ laser-cut P\u0026amp;O steel with 1\/4″ thick frame and winch plates for uncompromising durability. Frame support brackets and a washer tank skid come standard, while fully welded 3\/4″ D-ring tabs provide dependable recovery points.\u003c\/p\u003e\n\u003cp\u003eThe bumper is winch-ready, fitting most 8k-12k winches, with the best performance from synthetic rope and a hawse fairlead. For lighting, the bumper accepts 30″ single-row light bars such as the Baja Designs S8 or Heretic Studio. Pre-drilled turn signal holes are included, with signals or caps supplied depending on year range, and a bolt-on top fill plate is provided for 2003-2005 models.\u003c\/p\u003e\n\u003cp\u003eThe Overland Series Front Bumper is available in multiple bull bar options. Bull bar tubing is made from .120 wall 1-3\/4″ diameter HREW tubing for added protection. Unless ordered with a powder coat finish, the bumper must be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ 2003-2005 \/ No Bull Bar","offer_id":47826256068765,"sku":"1100-3103-30-NB","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826256101533,"sku":"1100-3103-30-MH","price":1877.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256134301,"sku":"1100-3103-30-FH","price":1957.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ No Bull Bar","offer_id":47826256167069,"sku":"1100-3106-30-NB","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826256199837,"sku":"1100-3106-30-MH","price":1877.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256232605,"sku":"1100-3106-30-FH","price":1957.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ No Bull Bar","offer_id":47826256265373,"sku":"1100-3103-30-NB-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Mid-Height Bull Bar","offer_id":47826256298141,"sku":"1100-3103-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2003-2005 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256330909,"sku":"1100-3103-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ No Bull Bar","offer_id":47826256363677,"sku":"1100-3106-30-NB-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Mid-Height Bull Bar","offer_id":47826256396445,"sku":"1100-3106-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ 2006-2009 \/ Full-Height Bull Bar w\/ Plate Gussets","offer_id":47826256429213,"sku":"1100-3106-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGen4RunnerOverlandBumperCover.jpg?v=1775887582"},{"product_id":"4runner-overland-series-front-bumper-5th-gen-2014","title":"4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Overland Series Front Bumper for the 2014–2024 Toyota 4Runner is built for serious off-road performance and added front-end protection. Designed to improve approach angles and offer greater clearance for larger tires, this bumper enhances your 4Runner’s trail capabilities without sacrificing durability or style. It’s constructed from 3\/16″ laser-cut P\u0026amp;O steel, with 1\/4″ thick mounting plates for solid frame attachment. For added recovery strength, every bumper includes fully welded 3\/4″ D-ring tabs, reinforced from both the front and back.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptional bull bar configurations offer further protection and are made from .120 wall, 1 3\/4″ diameter HREW tubing. If your 4Runner is equipped with Toyota’s TSS system, selecting the TSS relocation bracket is necessary. Please note that the mid-height bull bar is not compatible with TSS. The bumper is also not compatible with the factory MTM front camera unless the camera is relocated above the bumper.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWinch compatibility is a key feature of this bumper. It fits most 8k–12k winches, ideally those that allow for the relocation of the electrical control box. Some integrated control box winches may require trimming of the grille support brackets for proper fitment. Common winches like the ComeUp, Smittybilt X20, and Warn Zeon and VR series have been confirmed to fit. We recommend synthetic rope and a hawse-style fairlead. Some roller fairleads may not fit the recessed mounting plate.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Overland Series Front Bumper is also ready for lighting upgrades. It’s designed to fit most 30″ single-row light bars, with specific compatibility for the Baja Designs S8, RIGID 30″ SR series, and Extreme LED 30″ 5D models. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAdditionally, this bumper comes with a power steering cooler kit to replace the factory steel cooler lines. This not only creates more room for winch installation but also eliminates the vulnerable U-shaped portion of the lines near the frame. The replacement process is straightforward and does not require draining the power steering system. The result is a more protected and trail-ready setup for your 4Runner.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826256461981,"sku":"1100-3114-30-NB","price":1798.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826256494749,"sku":"1100-3114-30-MH","price":1877.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826256527517,"sku":"1100-3114-30-FH","price":1957.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826256560285,"sku":"1100-3114-30-FHH","price":2006.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826256593053,"sku":"1100-3114-30-NB-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826256625821,"sku":"1100-3114-30-MH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826256658589,"sku":"1100-3114-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826256691357,"sku":"1100-3114-30-FHH-01NA","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5thGen4RunnerOverlandFrontCover.jpg?v=1775887584"},{"product_id":"4runner-rock-runner-front-bumper-5th-gen-1-lift-2010","title":"4Runner Rock Runner Front Bumper \/ 5th Gen \/ 1\" Body Lift \/ 2010+","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Rock Runner Front Bumper transforms your 5th Gen 4Runner into a trail-ready beast with a modular 3-piece design built for strength, clearance, and versatility. Designed for serious use, this bumper requires trimming the factory plastic bumper for a proper fit and maximum clearance. Constructed from 11-gauge laser-cut P\u0026amp;O steel with 3\/16-inch thick mounting plates and winch plate, the Rock Runner provides a solid foundation for recovery and protection. Fully welded ¾-inch D-ring tabs are included standard, giving you reliable recovery points when you need them. Weight ranges from 100-108 lbs depending on your chosen configuration (plate or tube sides, with or without bull bar).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper comes equipped with frame support brackets, a winch cover plate, and a bridge skid to tie into our existing skid plates and the factory cross member. It fits most 8k-10k winches, with Smittybilt X20 and Warn VR Series confirmed. Winches with synthetic rope and a hawse fairlead are recommended for the cleanest fit, though some trimming of the grille support brackets may be needed for integrated control box winches.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLighting and utility are baked in. Tube side wings include mounts sized for up to one Baja Designs Squadron, one S2, and one S1 light per side, while front cutouts provide easy winch lever access. An aluminum fill panel completes the look if you’re running without a winch. For additional armor, a washer tank skid can be added.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOptional features include a TSS relocation bracket for 2020-2024 4Runners to keep Toyota Safety Sense fully functional. Unless you select the powder coat option, the bumper ships raw steel and must be painted or coated to prevent rust.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cb id=\"docs-internal-guid-c827a162-7fff-3db0-c8da-b2145ffaf01b\"\u003eNote: \u003c\/b\u003eThis bumper is made for 4Runners with a 1\" body lift. If you do not have a body lift, \u003ca href=\"https:\/\/c4fabrication.com\/products\/4runner-rock-runner-front-bumper-5th-gen-2010\" title=\"C4 Rock Runner Front Bumper no Lift\"\u003eplease shop this version instead. \u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Plate Sides w\/o Light Mounts \/ No Bull Bar","offer_id":47826257772701,"sku":"1110-30393-NB-P-1BL","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Plate Sides w\/o Light Mounts \/ Mid-Height Bull Bar","offer_id":47826257805469,"sku":"1110-30393-MH-P-1BL","price":1328.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides w\/ Light Mounts \/ No Bull Bar","offer_id":47826257838237,"sku":"1110-30393-NB-T-1BL","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides w\/ Light Mounts \/ Mid-Height Bull Bar","offer_id":47826257871005,"sku":"1110-30393-MH-T-1BL","price":1328.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides w\/o Light Mounts \/ No Bull Bar","offer_id":47826257903773,"sku":"1110-30393-NB-P-1BL-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides w\/o Light Mounts \/ Mid-Height Bull Bar","offer_id":47826257936541,"sku":"1110-30393-MH-P-1BL-01NA","price":1549.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides w\/ Light Mounts \/ No Bull Bar","offer_id":47826257969309,"sku":"1110-30393-NB-T-1BL-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides w\/ Light Mounts \/ Mid-Height Bull Bar","offer_id":47826258002077,"sku":"1110-30393-MH-T-1BL-01NA","price":1453.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/5th-Gen-4Runner-Rock-Runner-1-in-lift-MAIN.jpg?v=1775887595"},{"product_id":"4runner-rock-runner-front-bumper-5th-gen-2010","title":"4Runner Rock Runner Front Bumper \/ 5th Gen \/ 2010-2024","description":"\u003cp\u003eThe Rock Runner Front Bumper transforms your 5th Gen 4Runner into a trail-ready beast with a modular 3-piece design built for strength, clearance, and versatility. Designed for serious use, this bumper requires trimming the factory plastic bumper for a proper fit and maximum clearance. Constructed from 11-gauge laser-cut P\u0026amp;O steel with 3\/16-inch thick mounting plates and winch plate, the Rock Runner provides a solid foundation for recovery and protection. Fully welded ¾-inch D-ring tabs are included standard, giving you reliable recovery points when you need them. Weight ranges from 100-108 lbs depending on your chosen configuration (plate or tube sides, with or without bull bar).\u003c\/p\u003e\n\u003cp\u003eThe bumper comes equipped with frame support brackets, a winch cover plate, and a bridge skid to tie into our existing skid plates and the factory cross member. It fits most 8k-10k winches, with Smittybilt X20 and Warn VR Series confirmed. Winches with synthetic rope and a hawse fairlead are recommended for the cleanest fit, though some trimming of the grille support brackets may be needed for integrated control box winches.\u003c\/p\u003e\n\u003cp\u003eLighting and utility are baked in. Tube side wings include mounts sized for up to one Baja Designs Squadron, one S2, and one S1 light per side, while front cutouts provide easy winch lever access. An aluminum fill panel completes the look if you’re running without a winch. For additional armor, a washer tank skid can be added.\u003c\/p\u003e\n\u003cp\u003eOptional features include a TSS relocation bracket for 2020-2024 4Runners to keep Toyota Safety Sense fully functional. Unless you select the powder coat option, the bumper ships raw steel and must be painted or coated to prevent rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e If your 4Runner has a 1-inch body lift, please \u003ca href=\"https:\/\/c4fabrication.com\/products\/4runner-rock-runner-front-bumper-5th-gen-1-lift-2010\" title='C4 Rock Runner Front Bumper with 1\" Body Lift'\u003echeck out this version. \u003c\/a\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Plate Sides w\/o Light Mounts \/ No Bull Bar","offer_id":47826258067613,"sku":"1110-30393-NB-P","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Plate Sides w\/o Light Mounts \/ Mid-Height Bull Bar","offer_id":47826258100381,"sku":"1110-30393-MH-P","price":1328.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides w\/ Light Mounts \/ No Bull Bar","offer_id":47826258133149,"sku":"1110-30393-NB-T","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides w\/ Light Mounts \/ Mid-Height Bull Bar","offer_id":47826258165917,"sku":"1110-30393-MH-T","price":1328.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides w\/o Light Mounts \/ No Bull Bar","offer_id":47826258198685,"sku":"1110-30393-NB-P-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides w\/o Light Mounts \/ Mid-Height Bull Bar","offer_id":47826258231453,"sku":"1110-30393-MH-P-01NA","price":1549.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides w\/ Light Mounts \/ No Bull Bar","offer_id":47826258264221,"sku":"1110-30393-NB-T-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides w\/ Light Mounts \/ Mid-Height Bull Bar","offer_id":47826258296989,"sku":"1110-30393-MH-T-01NA","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/CNGEARS4RunnerQuarteringCover.jpg?v=1775887598"},{"product_id":"land-cruiser-front-lo-pro-winch-bumper-250-series-2024","title":"Land Cruiser Front Lo-Pro Winch Bumper \/ 250 Series \/ 2024-2025","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThe Land Cruiser Front Lo-Pro Winch Bumper for the 250 Series is built to deliver strength, functionality, and clean factory integration. Designed to work across all trims, this low-profile bumper retains full use of your Land Cruiser’s OEM sensors and safety systems, so you don’t lose any advanced features when upgrading for off-road performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis bumper is engineered to mount a 20\" single row light bar, with guaranteed fitment for the Baja Designs S8 20\", Heretic Studio 20\", and Rigid Industries SR-Series 20\". Integrated tabs eliminate the need for bulky mounting legs, spaced at 21-5\/8\" for precise fit. A behind-the-grille bracket is also included, allowing you to run up to four lights, perfect for setups with LP4s, Squadron XLs, or Rigid 360 Series lights.\u003c\/p\u003e\n\u003cp\u003eThe outer shell is made of 11-gauge steel, while the winch plate and mounting brackets use 3\/16\" steel for maximum strength. Standard 3\/4\" D-ring tabs are fully welded front and back for solid recovery points. Despite the heavy-duty build, there’s no net weight gain. Weighing in at 45 pounds, it replaces 45 pounds of OEM parts for a balanced install.\u003c\/p\u003e\n\u003cp\u003eThe bumper fits most 8-12k winches, with synthetic rope and a hawse-style fairlead recommended for the best functionality. Roller fairleads are too large for the recessed fairlead mounting plate. Installation requires trimming the center plastic portion of the factory bumper cover, and all necessary hardware is included. To protect against rust, the bumper must be painted or powder coated unless you select the powder-coated option at purchase.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826260689053,"sku":"1624-10100","price":649.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826260721821,"sku":"1624-10100-01NA","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/LC250LoProBumperCover.jpg?v=1775887667"},{"product_id":"tacoma-front-lo-pro-winch-bumper-3rd-gen-2016","title":"Tacoma Front Lo-Pro Winch Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eThe Lo-Pro Winch Bumper is engineered for strength, clearance, and clean styling while keeping recovery gear tucked in tight. Designed for 3rd Gen Tacomas, this bumper integrates seamlessly with your truck’s lines while packing serious capability.\u003c\/p\u003e\n\u003cp\u003eBuilt to house most 8k-12k winches, the recessed winch mount allows for discreet placement and easy access through front slots. We recommend winches with synthetic rope and a hawse fairlead for the best fit. Integrated control box winches may require minor trimming of the grille support brackets. (Commonly used winches include ComeUp, Smittybilt X20, and Warn Zeon\/VR series. Not compatible with the Warn Epic fairlead.)\u003c\/p\u003e\n\u003cp\u003eThe bumper is designed around 30″ single-row light bars, with guaranteed fitment for the Baja Designs S8, Extreme LED 5D, and RIGID SR series. Recovery points are built into the bumper with massive 3\/4″ thick D-ring tabs, fully welded front and back. At only 75 lbs, the bumper balances durability with a lightweight profile. It’s also compatible with the TRD Pro skid plate, and the optional bull bar works with Toyota Safety Sense, though not on TRD Pro grille models.\u003c\/p\u003e\n\u003cp\u003eInstallation does require cutting the center section of the factory plastic bumper. The bumper ships bare steel, ready for your own paint or powder coat finish to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826263244957,"sku":"1200-1116-30-NB","price":889.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826263277725,"sku":"1200-1116-30-MH","price":998.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826263310493,"sku":"1200-1116-30-NB-01NA","price":999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826263343261,"sku":"1200-1116-30-MH-01NA","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTacomaLoProBumper.jpg?v=1775887727"},{"product_id":"tacoma-front-lo-pro-winch-bumper-4th-gen-2024","title":"Tacoma Front Lo-Pro Winch Bumper \/ 4th Gen \/ 2024-2026","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Tacoma Lo-Pro Winch Bumper for the 4th Gen (2024+) is a sleek, functional upgrade designed to work seamlessly with all trim levels, although Trailhunter models will require trimming of the front skid plate for proper fitment. Engineered to retain full compatibility with OEM sensors and safety systems, this bumper offers rugged protection without compromising factory functionality. It’s built to house a pair of Baja Designs S2 fog lights, and other brands may not fit as precisely. The outer shell is crafted from durable 11-gauge steel, while the winch plate and mounting brackets are made from heavy-duty 3\/16\" steel. Fully welded 3\/4\" D-ring tabs, reinforced both front and back, provide solid recovery points when you need them most.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper is compatible with most 8k-12k lb winches that do not have integrated control packs; relocation of the control box and some fitting or trimming may be required. For best results, use a winch with synthetic rope and a hawse-style fairlead, as roller fairleads may not fit within the recessed mounting area. Installation requires cutting the center plastic section of the factory bumper cover, and all necessary hardware is included. Weighing in at 74 pounds, this bumper offers a strong, balanced blend of protection and performance. Note: unless you select the powder-coated option, the bumper will require painting or powder coating before installation to protect against rust.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826263408797,"sku":"1224-10300","price":799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826263441565,"sku":"1224-10300-01NA","price":959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGenTacomaLoProCover.jpg?v=1775887729"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2011","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Tacoma Hybrid Front Bumper for 2nd Gen models (2005–2011) is a rugged, functional upgrade designed for those who want maximum performance without the hassle of complex installation. This 100% bolt-on bumper requires no cutting or welding, making it a straightforward and clean install. Built for utility and durability, it’s fully winch-compatible with front-facing cutouts for easy access to the winch rope and clutch lever.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEngineered to fit most winches in the 8,000–12,000 lb range, the bumper performs best with winches that have a relocatable control box. Popular options like ComeUp, Smittybilt X20, and Warn Zeon or VR series are known to fit. Integrated control box winches may require minor trimming of the grille support brackets. For ideal performance and clearance, synthetic rope winches with a hawse-style fairlead are recommended—larger roller fairleads may not fit the recessed fairlead mounting plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConstructed from high-quality materials, the main bumper body uses 3\/16\" thick steel, while the winch and mounting plates are built from heavy-duty 1\/4\" steel. The tubing is 1 3\/4\" outer diameter with a 1\/8\" wall thickness, offering the strength and resilience needed for serious trail use. Standard features include 3\/4\" thick D-ring tabs that are fully welded front and back for secure recovery points.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDepending on your configuration, the bumper weighs between 125 and 137 pounds—125 lbs for the no bull bar option, 130 lbs with the mid-height bull bar, and 137 lbs for the full-height bull bar with side gussets. It’s also designed to house a 30\" single row light bar, with optimal fitment for the Baja Designs S8, but it’s also compatible with light bars from Extreme LED and RIGID.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEach bumper includes additional front bumper frame support brackets, a $177 value, at no extra cost, ensuring a secure and reinforced mounting setup. If the raw steel finish is selected, painting or powder coating is required before installation to prevent corrosion and ensure long-term durability.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Thanks (Standard Width)","offer_id":47826264391837,"sku":"1200-3205-30-NB","price":1403.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes (Build Wider)","offer_id":47826264424605,"sku":"1200-3205-30-NB-W","price":1478.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Thanks (Standard Width)","offer_id":47826264457373,"sku":"1200-3205-30-MH","price":1478.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes (Build Wider)","offer_id":47826264490141,"sku":"1200-3205-30-MH-W","price":1553.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Thanks (Standard Width)","offer_id":47826264522909,"sku":"1200-3205-30-FH","price":1578.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes (Build Wider)","offer_id":47826264555677,"sku":"1200-3205-30-FH-W","price":1653.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Thanks (Standard Width)","offer_id":47826264588445,"sku":"1200-3205-30-NB-01NA","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes (Build Wider)","offer_id":47826264621213,"sku":"1200-3205-30-NB-W-01NA","price":1659.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Thanks (Standard Width)","offer_id":47826264653981,"sku":"1200-3205-30-MH-01NA","price":1659.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes (Build Wider)","offer_id":47826264686749,"sku":"1200-3205-30-MH-W-01NA","price":1759.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Thanks (Standard Width)","offer_id":47826264719517,"sku":"1200-3205-30-FH-01NA","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes (Build Wider)","offer_id":47826264752285,"sku":"1200-3205-30-FH-W-01NA","price":1859.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaHybridFrontBumperCover.jpg?v=1775887741"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2015","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUpgrade your 2nd Gen Tacoma (2012-2015) with a rugged and functional Hybrid Front Bumper designed for serious off-road performance and daily reliability. This bumper is 100% bolt-on, requiring minor cutting, but no welding for installation, making it a straightforward upgrade for most anyone. Built with off-road utility in mind, it comes winch-ready with cutouts for easy access to the rope and clutch lever, allowing seamless recovery operations when you need them most.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConstructed from high-strength materials, the bumper features a main body made of 3\/16\" thick steel, 1\/4\" thick steel mounting and winch plates, and 1 3\/4\" OD tubing with 1\/8\" wall thickness. Fully welded 3\/4\" thick D-ring tabs are included standard, offering reliable anchor points for recovery gear. Whether you opt for the version with no bull bar, mid-height bull bar, or full-height bull bar with side tube gussets, this bumper is engineered to handle whatever your Tacoma faces.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper accommodates most 8k–12k winches, with recommended compatibility for brands like ComeUp, Smittybilt X20, and Warn Zeon or VR series. Winches with integrated control boxes may require light trimming of the grille support brackets. For best fitment and ease of use, synthetic rope and a hawse-style fairlead are recommended, as some roller fairleads may not clear the recessed mounting plate.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLighting options are well-supported with a recessed light bar slot specifically sized for the 30” Baja Designs S8, RIGID SR-Series, or Extreme LED 5D light bar. Additionally, all bumpers come standard with front bumper frame support brackets to improve structural strength, a $177 value included at no extra cost.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIf not ordered with powder coating, the bumper will require finishing prior to installation to prevent corrosion. Whether you're building your truck for weekend trails or daily toughness, this Hybrid Front Bumper delivers on both form and function.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Thanks (Standard Width)","offer_id":47826264817821,"sku":"1200-3212-30-NB","price":1403.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes (Build Wider)","offer_id":47826264850589,"sku":"1200-3212-30-NB-W","price":1478.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Thanks (Standard Width)","offer_id":47826264883357,"sku":"1200-3212-30-MH","price":1478.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes (Build Wider)","offer_id":47826264916125,"sku":"1200-3212-30-MH-W","price":1553.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Thanks (Standard Width)","offer_id":47826264948893,"sku":"1200-3212-30-FH","price":1578.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes (Build Wider)","offer_id":47826264981661,"sku":"1200-3212-30-FH-W","price":1653.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Thanks (Standard Width)","offer_id":47826265014429,"sku":"1200-3212-30-NB-01NA","price":1599.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes (Build Wider)","offer_id":47826265047197,"sku":"1200-3212-30-NB-W-01NA","price":1659.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Thanks (Standard Width)","offer_id":47826265079965,"sku":"1200-3212-30-MH-01NA","price":1659.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes (Build Wider)","offer_id":47826265112733,"sku":"1200-3212-30-MH-W-01NA","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Thanks (Standard Width)","offer_id":47826265145501,"sku":"1200-3212-30-FH-01NA","price":1703.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes (Build Wider)","offer_id":47826265178269,"sku":"1200-3212-30-FH-W-01NA","price":1859.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/Late2ndGenTacomaHybridFrontBumperCover.jpg?v=1775887743"},{"product_id":"tacoma-hybrid-front-bumper-3rd-gen-2016","title":"Tacoma Hybrid Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eOur 3rd Gen Tacoma Hybrid Front Bumper strikes the perfect balance between rugged strength and streamlined functionality. Engineered for 3rd Gen Tacomas, this high-clearance bumper requires trimming of the factory plastic bumper for proper installation. This results in a sleek, aggressive fit that maximizes approach angle.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned to accommodate most 8,000–12,000 lb winches, it’s best paired with models that allow remote relocation of the control box. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon, and VR Series. Winches with integrated control boxes may need slight modification to the grille support brackets. For ideal performance, we recommend synthetic rope and a hawse-style fairlead.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis bumper is also built to house a 30\" single-row light bar (specifically the Baja Designs S8), with compatibility for the RIGID 30\" SR Series and Extreme LED 5D. Additional cutouts allow mounting of up to 4 Baja Designs Squadron lights, 2 S2 lights, and provide direct winch lever access.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Thanks (Standard Width)","offer_id":47826265211037,"sku":"1200-3216-30-NB","price":1454.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes (Build Wider)","offer_id":47826265243805,"sku":"1200-3216-30-NB-W","price":1529.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Thanks (Standard Width)","offer_id":47826265276573,"sku":"1200-3216-30-MH","price":1529.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes (Build Wider)","offer_id":47826265309341,"sku":"1200-3216-30-MH-W","price":1604.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Thanks (Standard Width)","offer_id":47826265342109,"sku":"1200-3216-30-FH","price":1629.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes (Build Wider)","offer_id":47826265374877,"sku":"1200-3216-30-FH-W","price":1704.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Thanks (Standard Width)","offer_id":47826265407645,"sku":"1200-3216-30-NB-01NA","price":1659.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes (Build Wider)","offer_id":47826265440413,"sku":"1200-3216-30-NB-W-01NA","price":1759.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Thanks (Standard Width)","offer_id":47826265473181,"sku":"1200-3216-30-MH-01NA","price":1759.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes (Build Wider)","offer_id":47826265505949,"sku":"1200-3216-30-MH-W-01NA","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Thanks (Standard Width)","offer_id":47826265538717,"sku":"1200-3216-30-FH-01NA","price":1859.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes (Build Wider)","offer_id":47826265571485,"sku":"1200-3216-30-FH-W-01NA","price":1959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTacomaHybridFrontBumper.jpg?v=1775887745"},{"product_id":"tacoma-hybrid-front-bumper-4th-gen-2024","title":"Tacoma Hybrid Front Bumper \/ 4th Gen \/ 2024-2026","description":"\u003cp\u003eBuilt to balance strength, clearance, and versatility, the Tacoma Hybrid Front Bumper gives your 4th Gen Tacoma the protection and functionality needed for serious off-road use. This bumper fits most 8k-12k winches, with confirmed fitment for the Warn VR series. The electrical control box must be relocated, and some trimming\/fitting may be required. For best performance, we recommend using synthetic rope winches with a hawse fairlead, as larger roller fairleads may not fit the recessed mount. Convenient front cutouts provide easy winch lever access.\u003c\/p\u003e\n\u003cp\u003eThe bumper is designed to fit 30″ single-row light bars (Baja Designs S8, Heretic Studio 30\", Rigid SR-30) along with up to four Baja Designs Squadrons and two S2 lights, giving you maximum visibility on the trail.\u003c\/p\u003e\n\u003cp\u003eStrength is at the core of the design. The main body is crafted from 3\/16″ steel, with 1 3\/4″ OD tubing (1\/8″ wall thickness) and reinforced 1 1\/2″ OD gussets on the mid-height bull bar. Recovery points are handled by 3\/4″ thick D-ring tabs, fully welded front and back. Weight ranges from 107 lbs (no bull bar) to 123 lbs (mid-height bull bar with gussets).\u003c\/p\u003e\n\u003cp\u003eEvery bull bar option is compatible with Toyota Safety Sense and parking sensors, though some vehicles may require professional TSS recalibration after installation. The bumper also includes a washer tank skid and a winch controller relocation kit. TRD Pro and TRD Off-Road models do not require an additional mini-skid panel.\u003c\/p\u003e\n\u003cp\u003eInstallation requires trimming the factory plastic bumper. Unless powder coating is selected, the bumper must be painted or coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826265637021,"sku":"1224-31000-TRD","price":1874.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Anything else","offer_id":47826265669789,"sku":"1224-31000","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Low Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826265702557,"sku":"1224-31000-LB-TRD","price":1949.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Low Bull Bar \/ Anything else","offer_id":47826265735325,"sku":"1224-31000-LB","price":1979.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar w\/ Tube Gussets \/ TRD Pro or TRD Off-Road","offer_id":47826265768093,"sku":"1224-31000-MH-TRD","price":2049.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar w\/ Tube Gussets \/ Anything else","offer_id":47826265800861,"sku":"1224-31000-MH","price":2079.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826265833629,"sku":"1224-31000-TRD-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Anything else","offer_id":47826265866397,"sku":"1224-31000-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Low Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826265899165,"sku":"1224-31000-LB-TRD-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Low Bull Bar \/ Anything else","offer_id":47826265931933,"sku":"1224-31000-LB-01NA","price":2259.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar w\/ Tube Gussets \/ TRD Pro or TRD Off-Road","offer_id":47826265964701,"sku":"1224-31000-MH-TRD-01NA","price":2299.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar w\/ Tube Gussets \/ Anything else","offer_id":47826265997469,"sku":"1224-31000-MH-01NA","price":2359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGenTacomaHybridCover.jpg?v=1775887747"},{"product_id":"tacoma-lo-pro-bumper-high-clearance-additions-4th-gen-2024","title":"Tacoma Lo-Pro Bumper High Clearance Additions\/ 4th Gen \/ 2024-2026","description":"\u003cp\u003eTake your Tacoma’s approach angle to the next level with these High Clearance Additions, built specifically for the C4 Lo-Pro Winch Bumper. Designed to bolt directly onto the Lo-Pro (sold separately), these additions provide extra clearance up front, giving you more room for larger tires and a better line over obstacles.\u003c\/p\u003e\n\u003cp\u003eCrafted from durable 11-gauge steel with 3\/16\" mounting plates, the pair weighs only 20 lbs and installs using the included hardware, no drilling or welding required. Cutting of the plastic bumper is necessary for proper fitment. To ensure long-lasting protection, these parts must be painted or powder coated before installation unless you select the powder-coated option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The Lo-Pro Bumper is not included and must be purchased separately.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826266063005,"sku":"1224-10500","price":549.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826266095773,"sku":"1224-10500-01NA","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGenTacomaLoProHighClearanceSideAdditionsCover.jpg?v=1775887747"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Tacoma Overland Front Bumper for 3rd Gen models (2016–2023) is built for serious off-road capability and aggressive styling. Constructed from 3\/16″ laser-cut P\u0026amp;O steel with 1\/4″ thick mounting plates, this bumper offers a rugged foundation for front-end protection. Fully welded 3\/4″ D-ring tabs come standard for secure recovery points. Weighing in at 115 lbs without a bull bar and up to 135 lbs with full-height bull bar and headlight hoops, this bumper delivers strength without excessive weight.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned for functionality, it fits most 8k–12k winches, including ComeUp, Smittybilt X20, and Warn Zeon or VR series. Winches with integrated control boxes may require trimming of the grille support brackets, so we recommend models with relocatable control boxes for easier installation. Synthetic rope winches paired with a hawse-style fairlead are strongly recommended, as some roller fairleads may not fit the recessed fairlead mount. Front-facing cutouts provide easy access to the winch clutch lever for fast engagement in recovery scenarios.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper is also lighting-ready, with a dedicated slot for a 30″ single-row light bar, specifically designed around the Baja Designs S8, but also compatible with the RIGID 30″ SR Series and Extreme LED 5D bars. Fog light pockets are made to fit Baja Designs Squadron lights only and do not support factory fog lights.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInstallation requires trimming of the factory plastic bumper, and powder coating or painting is necessary unless you opt for our powder coat option. Note that the mid-height bull bar version is not compatible with Toyota Safety Sense (TSS). For overlanders and trail rigs alike, this bumper combines clean design, excellent clearance, and essential utility upgrades in one trail-ready package.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826266128541,"sku":"1200-3116-30-NB","price":1608.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826266161309,"sku":"1200-3116-30-MH","price":1683.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826266194077,"sku":"1200-3116-30-FH","price":1783.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826266226845,"sku":"1200-3116-30-FHH","price":1833.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826266259613,"sku":"1200-3116-30-NB-01NA","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826266292381,"sku":"1200-3116-30-MH-01NA","price":1899.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826266325149,"sku":"1200-3116-30-FH-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826266357917,"sku":"1200-3116-30-FHH-01NA","price":2059.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTacomaOverlandFrontBumper.jpg?v=1775887749"},{"product_id":"tacoma-overland-front-bumper-4th-gen-2024","title":"Tacoma Overland Front Bumper \/ 4th Gen \/ 2024-2026","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUpgrade the front end of your 2024–2025 Tacoma with the Overland Front Bumper, built for serious off-road performance, winch compatibility, and seamless integration with modern lighting and safety systems. Designed specifically for the 4th Gen Tacoma, this bumper requires cutting of the factory plastic bumper for installation but delivers a clean, aggressive, and highly functional result.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCrafted from 3\/16″ laser-cut P\u0026amp;O steel, the bumper is built to handle rugged terrain while maintaining optimal clearance and approach angles. Integrated 3\/4″ thick D-ring recovery points are fully welded front and back for maximum strength. The design supports most 8k–12k winches, but winches with a top-mounted control box (like the Warn VR series) will require relocating the control box. For the best fit and performance, we recommend synthetic rope winches paired with a hawse fairlead; large roller fairleads may not fit the recessed mount.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConvenient front-facing cutouts allow access to your winch clutch lever, and the bumper comes ready for a 30\" single-row light bar, specifically the Baja Designs S8, Heretic Studio 30\", or Rigid SR-30. Fog light pockets are designed to house Baja Designs Squadron lights (factory fog lights are not compatible).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBull bar tubing is built from 1 3\/4\" OD steel with 1\/8\" wall thickness for strength without excess weight. Gussets and headlight hoops use 1 1\/2\" OD tubing. Depending on your bull bar selection, the bumper weight ranges from 114 lbs (no bull bar) to 138 lbs (full-height bull bar with headlight hoops). All bull bar configurations maintain compatibility with Toyota Safety Sense (TSS) and parking sensors, though some vehicles may require a professional TSS recalibration after installation.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncluded with the bumper is a washer tank skid and winch controller relocation kit. TRD Pro and TRD Off-Road models do not require an additional mini-skid. This product ships via Ground and, unless you select our powder-coated option, will need to be painted or powder coated before install to prevent rust. Rugged, functional, and ready for adventure, the Tacoma Overland Front Bumper is built to last.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826266423453,"sku":"1224-32000-TRD","price":1874.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Anything else","offer_id":47826266456221,"sku":"1224-32000","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Low Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826266488989,"sku":"1224-32000-LB-TRD","price":1949.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Low Bull Bar \/ Anything else","offer_id":47826266521757,"sku":"1224-32000-LB","price":1979.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar w\/ Tube Gussets \/ TRD Pro or TRD Off-Road","offer_id":47826266554525,"sku":"1224-32000-MH-TRD","price":2049.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar w\/ Tube Gussets \/ Anything else","offer_id":47826266587293,"sku":"1224-32000-MH","price":2079.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops \/ TRD Pro or TRD Off-Road","offer_id":47826266620061,"sku":"1224-32000-FHH-TRD","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops \/ Anything else","offer_id":47826266652829,"sku":"1224-32000-FHH","price":2129.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826266685597,"sku":"1224-32000-TRD-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Anything else","offer_id":47826266718365,"sku":"1224-32000-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Low Bull Bar \/ TRD Pro or TRD Off-Road","offer_id":47826266751133,"sku":"1224-32000-LB-TRD-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Low Bull Bar \/ Anything else","offer_id":47826266783901,"sku":"1224-32000-LB-01NA","price":2259.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar w\/ Tube Gussets \/ TRD Pro or TRD Off-Road","offer_id":47826266816669,"sku":"1224-32000-MH-TRD-01NA","price":2299.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar w\/ Tube Gussets \/ Anything else","offer_id":47826266849437,"sku":"1224-32000-MH-01NA","price":2359.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops \/ TRD Pro or TRD Off-Road","offer_id":47826266882205,"sku":"1224-32000-FHH-TRD-01NA","price":2359.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops \/ Anything else","offer_id":47826266914973,"sku":"1224-32000-FHH-01NA","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/4thGenTacomaOverlandCover.jpg?v=1775887751"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2011","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp data-end=\"432\" data-start=\"0\"\u003eThe 2nd Gen Tacoma Overland Series Front Bumper (2005–2011) delivers the perfect balance of trail protection, functionality, and aggressive styling. Crafted from 3\/16\" laser-cut P\u0026amp;O steel with 1\/4\" mounting plates, it’s built to withstand heavy abuse on the trail. Fully welded 3\/4\" D-ring tabs provide dependable recovery points, while the .120 wall 1 3\/4\" HREW steel bull bar tubing adds extra strength without unnecessary bulk.\u003c\/p\u003e\n\u003cp data-end=\"807\" data-start=\"434\"\u003eIts high-clearance profile is designed to maximize approach angles, improve tire clearance, and make fitting larger tires easier. The bumper installs with a true 100% bolt-on design. Weighing 125–145 pounds depending on bull bar configuration, it strikes an ideal balance between rugged durability and manageable weight.\u003c\/p\u003e\n\u003cp data-end=\"1198\" data-start=\"809\"\u003eThis bumper is winch-ready, accommodating most 8k–12k winches. Models with a relocated control box are recommended for best fitment, though integrated control box winches like the ComeUp, Smittybilt X20, Warn Zeon, and VR series can also fit with slight modifications. Synthetic rope and a hawse-style fairlead are recommended, as roller fairleads may not fit the recessed mounting area.\u003c\/p\u003e\n\u003cp data-end=\"1532\" data-start=\"1200\"\u003eLighting integration is built in, with cutouts for a 30\" single-row light bar, compatible with Baja Designs S8, Rigid SR-Series, or Extreme LED 5D, and dedicated fog pockets designed for Baja Designs Squadron lights. Every bumper also includes additional Front Bumper Frame Support Brackets, adding extra strength at a $177 value.\u003c\/p\u003e\n\u003cp data-end=\"1774\" data-start=\"1534\"\u003eTo protect against rust, you can choose the powder-coated finish or apply your own coating before installation. Designed for both toughness and utility, this bumper transforms your 2005–2011 Tacoma into a more capable and trail-ready rig.\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-fc0be7d2-7fff-17fd-5468-e6696d08ad89\"\u003e\u003cspan\u003eFor 2012-2015 Tacomas,  \u003c\/span\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/tacoma-overland-series-front-bumper-2nd-gen-2012-2015\"\u003e\u003cspan\u003eplease check out this bumper\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826267242653,"sku":"1200-3105-30-NB","price":1505.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826267275421,"sku":"1200-3105-30-MH","price":1580.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826267308189,"sku":"1200-3105-30-FH","price":1680.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826267340957,"sku":"1200-3105-30-FHH","price":1730.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826267373725,"sku":"1200-3105-30-NB-01NA","price":1699.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826267406493,"sku":"1200-3105-30-MH-01NA","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826267439261,"sku":"1200-3105-30-FH-01NA","price":1899.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826267472029,"sku":"1200-3105-30-FHH-01NA","price":1959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaOverlandFrontBumperCover.jpg?v=1775887756"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2015","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe 2nd Gen Tacoma Overland Series Front Bumper (2012–2015) is engineered for serious off-road performance and rugged protection while maintaining a clean, functional design. Built from 3\/16\" laser-cut P\u0026amp;O steel with 1\/4\" mounting plates and fully welded 3\/4\" thick D-ring tabs, this bumper is ready to handle demanding recovery situations and trail abuse. Bull bar tubing is formed from .120 wall 1 3\/4\" HREW steel, offering the strength and clearance you need without unnecessary weight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith its high-clearance design, this bumper dramatically improves approach angles, allows for easier fitment of larger tires, and provides much-needed protection for the front end. It’s a true 100% bolt-on upgrade, though minor trimming is required on 2012–2015 models. At 125–145 pounds depending on bull bar configuration, it balances durability with manageable weight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper is winch-ready, fitting most 8k–12k winches, with the best results coming from models that allow relocation of the control box. Integrated control box winches may require trimming of the grille support brackets, but popular options like ComeUp, Smittybilt X20, Warn Zeon, and VR series are proven fits. For optimal use, synthetic rope and a hawse-style fairlead are recommended, as roller fairleads may not fit the recessed mount.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eLighting integration comes standard with cutouts designed for a 30\" single-row light bar, such as the Baja Designs S8, Rigid SR-Series, or Extreme LED 5D, and dedicated fog pockets for Baja Designs Squadron lights. Additional Front Bumper Frame Support Brackets are also included, adding $177 of value and extra strength for demanding recovery pulls.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFor maximum durability, select the powder-coated finish or coat it yourself before installation to prevent rust. This bumper is purpose-built to upgrade your 2012–2015 Tacoma into a more capable, trail-ready machine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-fc0be7d2-7fff-17fd-5468-e6696d08ad89\"\u003e\u003cspan\u003eFor 2005-2011 Tacomas, \u003c\/span\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/tacoma-overland-series-front-bumper-2nd-gen-2005-2011\"\u003e\u003cspan\u003eplease check out this bumper\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826267537565,"sku":"1200-3112-30-NB","price":1505.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826267570333,"sku":"1200-3112-30-MH","price":1580.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826267603101,"sku":"1200-3112-30-FH","price":1680.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826267635869,"sku":"1200-3112-30-FHH","price":1730.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826267668637,"sku":"1200-3112-30-NB-01NA","price":1699.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826267701405,"sku":"1200-3112-30-MH-01NA","price":1799.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826267734173,"sku":"1200-3112-30-FH-01NA","price":1899.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826267766941,"sku":"1200-3112-30-FHH-01NA","price":1999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/Tacoma-Overland-Series-Front-Bumper-2nd-Gen-2012-2015.jpg?v=1775887758"},{"product_id":"tacoma-rock-runner-front-bumper-2nd-gen-2005-201","title":"Tacoma Rock Runner Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eThe Tacoma Rock Runner Front Bumper for the 2nd Gen (2005-2011) Tacoma delivers serious trail performance with a modular design built for strength, winch compatibility, and maximum clearance. Built from 11-gauge laser-cut P\u0026amp;O steel with 3\/16-inch mounting plates and a reinforced winch plate, this bumper is designed to take abuse off-road while keeping your rig ready for recovery. Fully welded ¾-inch D-ring tabs come standard, and additional frame support brackets are included with every bumper for extra strength, a $177 value built right in.\u003c\/p\u003e\n\u003cp\u003eThe Rock Runner’s 3-piece design features bolt-on wings and can be outfitted with either plate or tube sides, both weighing just 85 pounds. Adding a bull bar only tacks on an additional 5 pounds, though note it isn’t compatible with Toyota Safety Sense. If you opt for the cross member delete package, you’ll replace the factory cross member with our upgraded version, plus receive a Rock Runner front skid plate and a power steering relocation kit.\u003c\/p\u003e\n\u003cp\u003eThe bumper fits most 8k-10k winches. We recommend winches with synthetic rope and a hawse fairlead for the cleanest fit. Popular options like the Smittybilt X20 and Warn VR series work well, though some integrated control box winches may require minor trimming of grille support brackets. A recessed fairlead plate keeps things tight, while front cutouts give you easy access to the winch lever.\u003c\/p\u003e\n\u003cp\u003eEvery bumper ships with a winch cover plate and bridge skid, ready to tie into your factory cross member or our skid systems. This bumper is built tough, designed smart, and ready to handle anything from weekend trail runs to overland expeditions. Unless you choose our powder-coated option, the bumper will need to be painted or coated prior to install to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Plate Sides \/ No Bull Bar","offer_id":47826269307037,"sku":"1200-3505-NB-P","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Plate Sides \/ Yes - Low Bar","offer_id":47826269339805,"sku":"1200-3505-MH-P","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides \/ No Bull Bar","offer_id":47826269372573,"sku":"1200-3505-NB-T","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides \/ Yes - Low Bar","offer_id":47826269405341,"sku":"1200-3505-MH-T","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Wide Tube Sides (for fiber glass) \/ No Bull Bar","offer_id":47826269438109,"sku":"1200-3505-NB-T-W","price":1299.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Wide Tube Sides (for fiber glass) \/ Yes - Low Bar","offer_id":47826269470877,"sku":"1200-3505-MH-T-W","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides \/ No Bull Bar","offer_id":47826269503645,"sku":"1200-3505-NB-P-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides \/ Yes - Low Bar","offer_id":47826269536413,"sku":"1200-3505-MH-P-01NA","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides \/ No Bull Bar","offer_id":47826269569181,"sku":"1200-3505-NB-T-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides \/ Yes - Low Bar","offer_id":47826269601949,"sku":"1200-3505-MH-T-01NA","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Wide Tube Sides (for fiber glass) \/ No Bull Bar","offer_id":47826269634717,"sku":"1200-3505-NB-T-W-01NA","price":1449.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Wide Tube Sides (for fiber glass) \/ Yes - Low Bar","offer_id":47826269667485,"sku":"1200-3505-MH-T-W-01NA","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaRockRunnerBumperCover.jpg?v=1775887774"},{"product_id":"tacoma-rock-runner-front-bumper-2nd-gen-2012-2015","title":"Tacoma Rock Runner Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp data-start=\"132\" data-end=\"677\"\u003eThe 2nd Gen Tacoma Rock Runner Front Bumper (2012-2015) is engineered for serious off-road capability, combining rugged strength with a modular design that maximizes clearance and winch integration. Crafted from precision-cut 11-gauge P\u0026amp;O steel with heavy-duty 3\/16-inch mounting plates and a reinforced winch plate, this bumper is built to withstand hard hits while ensuring your truck stays recovery-ready. Each unit includes fully welded ¾-inch D-ring tabs and a set of frame support brackets.\u003c\/p\u003e\n\u003cp data-start=\"679\" data-end=\"1128\"\u003eIts 3-piece modular construction features bolt-on wings that allow you to choose between plate or tube sides, both weighing in at just 85 pounds. A bull bar option adds only 5 extra pounds, though it’s not compatible with Toyota Safety Sense. For those selecting the cross member delete package, the bumper package expands to include a replacement cross member, Rock Runner skid plate, and a power steering relocation kit for seamless integration.\u003c\/p\u003e\n\u003cp data-start=\"1130\" data-end=\"1544\"\u003eDesigned to work with most 8k-10k winches, the Rock Runner excels with synthetic rope and a hawse-style fairlead for best fitment. Popular winch models such as the Smittybilt X20 and Warn VR series fit well, though integrated control box winches may require slight trimming of the grille support brackets. A recessed fairlead mount keeps everything tight, while dedicated cutouts ensure quick winch lever access.\u003c\/p\u003e\n\u003cp data-start=\"1546\" data-end=\"1939\"\u003eEach bumper ships standard with a winch cover plate and a bridge skid that ties into your factory cross member or existing skid system. Strong, modular, and trail-proven, the Rock Runner is equally at home on weekend adventures or extended overland trips. To prevent rust, the bumper will need to be painted or powder coated prior to installation unless you opt for the powder-coated finish.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Plate Sides \/ No Bull Bar","offer_id":47826269733021,"sku":"1200-3512-NB-P","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Plate Sides \/ Yes - Low Bar","offer_id":47826269765789,"sku":"1200-3512-MH-P","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides \/ No Bull Bar","offer_id":47826269798557,"sku":"1200-3512-NB-T","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides \/ Yes - Low Bar","offer_id":47826269831325,"sku":"1200-3512-MH-T","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Wide Tube Sides (for fiber glass) \/ No Bull Bar","offer_id":47826269864093,"sku":"1200-3512-NB-T-W","price":1299.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Wide Tube Sides (for fiber glass) \/ Yes - Low Bar","offer_id":47826269896861,"sku":"1200-3512-MH-T-W","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides \/ No Bull Bar","offer_id":47826269929629,"sku":"1200-3512-NB-P-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides \/ Yes - Low Bar","offer_id":47826269962397,"sku":"1200-3512-MH-P-01NA","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides \/ No Bull Bar","offer_id":47826269995165,"sku":"1200-3512-NB-T-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides \/ Yes - Low Bar","offer_id":47826270027933,"sku":"1200-3512-MH-T-01NA","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Wide Tube Sides (for fiber glass) \/ No Bull Bar","offer_id":47826270060701,"sku":"1200-3512-NB-T-W-01NA","price":1449.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Wide Tube Sides (for fiber glass) \/ Yes - Low Bar","offer_id":47826270093469,"sku":"1200-3512-MH-T-W-01NA","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTacomaRockRunnerBumperCover_4c520f6a-ac65-4320-8f75-07a5c632f525.jpg?v=1775887776"},{"product_id":"tacoma-rock-runner-front-bumper-3rd-gen-2016","title":"Tacoma Rock Runner Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Tacoma Rock Runner Front Bumper is a high-clearance front bumper that delivers strength, functionality, and aggressive styling. It features a modular, 3-piece design with bolt-on side wings, available in your choice of plate or tube style, and includes frame support brackets for added durability. Installation requires cutting of the factory plastic bumper for a clean, flush fit. If you select the optional cross member delete and skid plate for an additional fee of $799, trimming will be needed to remove the factory cross member, which is replaced with a high-clearance version. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eConstructed from 11-gauge laser-cut P\u0026amp;O steel, the bumper is reinforced with 3\/16-inch thick mounting and winch plates, ensuring strength where it matters most. The bumper includes fully welded 3\/4-inch D-ring tabs on the front and back, providing dependable recovery points. It’s winch-ready and compatible with most 8,000–10,000 lb winches that have relocatable control boxes. For the best fit and function, winches with synthetic rope and hawse-style fairleads are recommended, as some roller fairleads may be too large for the recessed mount. Popular winch options like the Smittybilt X20 and Warn VR series are known to fit well. Cutouts in the front of the bumper allow for easy winch lever access, and a winch cover plate is included along with a bridge skid that connects to existing C4 skid systems or the factory cross member.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUnless you choose our powder coated option, the Rock Runner Front Bumper will need to be painted or powder coated before installation to prevent rust. Please note that the optional bull bar is not compatible with Toyota Safety Sense (TSS) systems. With an aggressive stance, proven durability, and off-road capability, this bumper is built to perform in the harshest environments while giving your Tacoma a bold, trail-dominating presence.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ Plate Sides \/ No Bull Bar","offer_id":47826270191773,"sku":"1200-3516-NB-P","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Plate Sides \/ Yes - Low Bar","offer_id":47826270224541,"sku":"1200-3516-MB-P","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides \/ No Bull Bar","offer_id":47826270257309,"sku":"1200-3516-NB-T","price":1249.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Tube Sides \/ Yes - Low Bar","offer_id":47826270290077,"sku":"1200-3516-MB-T","price":1349.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Wide Tube Sides (for fiber glass) \/ No Bull Bar","offer_id":47826270322845,"sku":"1200-3516-NB-T-W","price":1299.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Wide Tube Sides (for fiber glass) \/ Yes - Low Bar","offer_id":47826270355613,"sku":"1200-3516-MB-T-W","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides \/ No Bull Bar","offer_id":47826270388381,"sku":"1200-3516-NB-P-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Plate Sides \/ Yes - Low Bar","offer_id":47826270421149,"sku":"1200-3516-MB-P-01NA","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides \/ No Bull Bar","offer_id":47826270453917,"sku":"1200-3516-NB-T-01NA","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Tube Sides \/ Yes - Low Bar","offer_id":47826270486685,"sku":"1200-3516-MB-T-01NA","price":1499.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Wide Tube Sides (for fiber glass) \/ No Bull Bar","offer_id":47826270519453,"sku":"1200-3516-NB-T-W-01NA","price":1449.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Wide Tube Sides (for fiber glass) \/ Yes - Low Bar","offer_id":47826270552221,"sku":"1200-3516-MB-T-W-01NA","price":1549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTacomaRockRunnerFrontBumper.jpg?v=1775887779"},{"product_id":"07-13-tundra-hybrid-front-bumper","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003e\u003cspan style=\"font-style: normal;\"\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003c\/li\u003e\n\u003cli\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003c\/li\u003e\n\u003cli\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003c\/li\u003e\n\u003cli\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.\u003c\/span\u003e\u003cspan\u003e(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003c\/li\u003e\n\u003cli\u003eBumper works with TRD Pro skid and aftermarket skids.\u003c\/li\u003e\n\u003cli\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv data-ogsc=\"black\" data-olk-copy-source=\"MessageBody\"\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e If you have fiberglass wide fenders, please shop \u003ca href=\"\/products\/tundra-hybrid-front-bumper-wide-fenders-2nd-gen-2007-2013\" title=\"Extra Wide\"\u003e\u003cstrong\u003ethis bumper listing\u003c\/strong\u003e\u003c\/a\u003e instead.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Parking Sensors","offer_id":47826271797405,"sku":"1400-3207-30-NB-NP","price":1710.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826271830173,"sku":"1400-3207-30-NB-PS","price":1790.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826271862941,"sku":"1400-3207-30-MH-NP","price":1785.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826271895709,"sku":"1400-3207-30-MH-PS","price":1865.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ No Parking Sensors","offer_id":47826271928477,"sku":"1400-3207-30-FH-NP","price":1895.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ Yes - Parking Sensors","offer_id":47826271961245,"sku":"1400-3207-30-FH-PS","price":1975.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Parking Sensors","offer_id":47826271994013,"sku":"1400-3207-30-NB-NP-01NA","price":1959.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826272026781,"sku":"1400-3207-30-NB-PS-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826272059549,"sku":"1400-3207-30-MH-NP-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826272092317,"sku":"1400-3207-30-MH-PS-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ No Parking Sensors","offer_id":47826272125085,"sku":"1400-3207-30-FH-NP-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ Yes - Parking Sensors","offer_id":47826272157853,"sku":"1400-3207-30-FH-PS-01NA","price":2159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenEarlyTundraHybridFrontBumperCover.jpg?v=1775887799"},{"product_id":"tundra-hybrid-front-bumper-2014","title":"Tundra Hybrid Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Hybrid Front Bumper for the 2014–2021 Toyota Tundra combines the strength of plate steel with the light fitment of round tube, delivering both durability and style. Its plate steel center provides a solid foundation for mounting a winch, while the tubular side sections offer multiple fog light configurations and a lighter, more streamlined appearance. Designed with improved clearance, this bumper enhances approach angles and allows for larger tire fitment.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBuilt from 3\/16″ laser-cut P\u0026amp;O steel, reinforced with 3\/8″ thick mounting plates and a 1\/4″ winch plate, the Hybrid Bumper ensures maximum strength where it matters most. Standard 3\/4″ welded D-ring tabs and .120 wall, 1 3\/4″ HREW tubing add recovery-ready durability. It fits most 8K–12K winches, with recommended use of synthetic rope and a hawse fairlead for the best fitment. Lighting compatibility is a core feature of this design. The bumper accommodates a 30″ single row light bar (Baja Designs S8, Rigid SR Series, Extreme LED 5D, and more), along with LP9 or LP6 lights mounted on top. For added protection, choose between a mid-height bull bar (compatible with Toyota Safety Sense on all models) or a full-height bull bar (works with TSS on TRD Pro grilles only).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cb id=\"docs-internal-guid-cf8133a5-7fff-6b36-05e6-a9a22d81f938\"\u003e\u003cspan\u003ePlease Note: This listing is for Tundra's with standard width fenders. If you have fiberglass wide fenders, please \u003c\/span\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/tundra-hybrid-front-bumper-wide-fenders-2nd-gen-2014-2021\"\u003e\u003cspan\u003eview this bumper listing instead\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Parking Sensors","offer_id":47826272190621,"sku":"1400-3214-30-NB-NP","price":1745.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826272223389,"sku":"1400-3214-30-NB-PS","price":1825.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826272256157,"sku":"1400-3214-30-MH-NP","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826272288925,"sku":"1400-3214-30-MH-PS","price":1900.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Parking Sensors","offer_id":47826272321693,"sku":"1400-3214-30-FH-NP","price":1930.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes - Parking Sensors","offer_id":47826272354461,"sku":"1400-3214-30-FH-PS","price":2010.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Parking Sensors","offer_id":47826272387229,"sku":"1400-3214-30-NB-NP-01NA","price":1959.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826272419997,"sku":"1400-3214-30-NB-PS-01NA","price":2059.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826272452765,"sku":"1400-3214-30-MH-NP-01NA","price":2059.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826272485533,"sku":"1400-3214-30-MH-PS-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Parking Sensors","offer_id":47826272518301,"sku":"1400-3214-30-FH-NP-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes - Parking Sensors","offer_id":47826272551069,"sku":"1400-3214-30-FH-PS-01NA","price":2159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/1400-3214-30.jpg?v=1775887799"},{"product_id":"tundra-hybrid-front-bumper-wide-fenders-2nd-gen-2007-2013","title":"Tundra Hybrid Front Bumper \/ Wide Fenders \/ 2nd gen \/ 2007-2013","description":"\u003cp data-start=\"148\" data-end=\"582\"\u003eThe Hybrid Front Bumper for the 2014-2021 Toyota Tundra blends the strength of plate steel with the lighter fitment of round tube, delivering durability without sacrificing style. A heavy-duty plate steel center creates a solid winch-mounting foundation, while tubular side sections keep weight down and allow multiple fog light options. Its high-clearance design improves approach angles and opens the door for larger tire fitment.\u003c\/p\u003e\n\u003cp data-start=\"584\" data-end=\"936\"\u003eBuilt from 3\/16″ laser-cut P\u0026amp;O steel and reinforced with 3\/8″ mounting plates and a 1\/4″ winch plate, the Hybrid Bumper is engineered for maximum strength where it matters most. Standard features include 3\/4″ welded D-ring tabs, .120 wall 1 3\/4″ HREW tubing, and compatibility with most 8K-12K winches (synthetic rope and hawse fairlead recommended).\u003c\/p\u003e\n\u003cp data-start=\"938\" data-end=\"1291\"\u003eLighting integration is front and center, with fitment for a 30″ single-row light bar (Baja Designs S8, Rigid SR Series, Extreme LED 5D, and more) plus LP6 or LP9 lights on top. For added protection, choose between a mid-height bull bar that works with Toyota Safety Sense on all models or a full-height bull bar designed for TRD Pro grilles with TSS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e This listing is for Tundra's with fiberglass wide fenders only. If your Tundra has standard width fenders, please view \u003ca href=\"\/products\/07-13-tundra-hybrid-front-bumper\" title=\"Standard Width\"\u003e\u003cstrong\u003ethis bumper listing\u003c\/strong\u003e\u003c\/a\u003e instead.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Parking Sensors","offer_id":47826272616605,"sku":"1400-3207-30-NB-NP-W","price":1790.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826272649373,"sku":"1400-3207-30-NB-PS-W","price":1870.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826272682141,"sku":"1400-3207-30-MH-NP-W","price":1865.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826272714909,"sku":"1400-3207-30-MH-PS-W","price":1945.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ No Parking Sensors","offer_id":47826272747677,"sku":"1400-3207-30-FH-NP-W","price":1975.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ Yes - Parking Sensors","offer_id":47826272780445,"sku":"1400-3207-30-FH-PS-W","price":2055.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Parking Sensors","offer_id":47826272813213,"sku":"1400-3207-30-NB-NP-W-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826272845981,"sku":"1400-3207-30-NB-PS-W-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826272878749,"sku":"1400-3207-30-MH-NP-W-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826272911517,"sku":"1400-3207-30-MH-PS-W-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ No Parking Sensors","offer_id":47826272944285,"sku":"1400-3207-30-FH-NP-W-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Side Tube Gussets \/ Yes - Parking Sensors","offer_id":47826272977053,"sku":"1400-3207-30-FH-PS-W-01NA","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenEarlyTundraHybridFrontBumperCover_97ec8c2c-a17f-47c6-896c-70df4dbfb83a.jpg?v=1775887801"},{"product_id":"tundra-hybrid-front-bumper-wide-fenders-2nd-gen-2014-2021","title":"Tundra Hybrid Front Bumper \/ Wide Fenders \/ 2nd Gen \/ 2014-2021","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003ePlease Note: This listing is for Tundra's with fiberglass wide fenders. If you have standard width fenders, please\u003ca href=\"https:\/\/c4fabrication.com\/products\/tundra-hybrid-front-bumper-2014\"\u003e  view this bumper listing instead\u003c\/a\u003e.\u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Hybrid Front Bumper for the 2014–2021 Toyota Tundra combines the strength of plate steel with the light fitment of round tube, delivering both durability and style. Its plate steel center provides a solid foundation for mounting a winch, while the tubular side sections offer multiple fog light configurations and a lighter, more streamlined appearance. Designed with improved clearance, this bumper enhances approach angles and allows for larger tire fitment.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eBuilt from 3\/16″ laser-cut P\u0026amp;O steel, reinforced with 3\/8″ thick mounting plates and a 1\/4″ winch plate, the Hybrid Bumper ensures maximum strength where it matters most. Standard 3\/4″ welded D-ring tabs and .120 wall, 1 3\/4″ HREW tubing add recovery-ready durability. It fits most 8K–12K winches, with recommended use of synthetic rope and a hawse fairlead for the best fitment. Lighting compatibility is a core feature of this design. The bumper accommodates a 30″ single row light bar (Baja Designs S8, Rigid SR Series, Extreme LED 5D, and more), along with LP9 or LP6 lights mounted on top. For added protection, choose between a mid-height bull bar (compatible with Toyota Safety Sense on all models) or a full-height bull bar (works with TSS on TRD Pro grilles only).\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlease Note: This listing is for Tundra's with fiberglass wide fenders. If you have standard width fenders, please\u003c\/span\u003e\u003ca href=\"https:\/\/c4fabrication.com\/products\/tundra-hybrid-front-bumper-2014\"\u003e\u003cspan\u003e  view this bumper listing instead\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Parking Sensors","offer_id":47826273042589,"sku":"1400-3214-30-NB-NP-W","price":1825.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826273075357,"sku":"1400-3214-30-NB-PS-W","price":1905.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826273108125,"sku":"1400-3214-30-MH-NP-W","price":1900.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826273140893,"sku":"1400-3214-30-MH-PS-W","price":1980.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Parking Sensors","offer_id":47826273173661,"sku":"1400-3214-30-FH-NP-W","price":2010.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes - Parking Sensors","offer_id":47826273206429,"sku":"1400-3214-30-FH-PS-W","price":2120.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Parking Sensors","offer_id":47826273239197,"sku":"1400-3214-30-NB-NP-W-01NA","price":2059.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":47826273271965,"sku":"1400-3214-30-NB-PS-W-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":47826273304733,"sku":"1400-3214-30-MH-NP-W-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":47826273337501,"sku":"1400-3214-30-MH-PS-W-01NA","price":2259.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Parking Sensors","offer_id":47826273370269,"sku":"1400-3214-30-FH-NP-W-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes - Parking Sensors","offer_id":47826273403037,"sku":"1400-3214-30-FH-PS-W-01NA","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTundraHybridFrontBumperCover.jpg?v=1775887802"},{"product_id":"tundra-hybrid-series-front-bumper-3rd-gen-2022","title":"Tundra Hybrid Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eThe Hybrid Series Front Bumper brings strength, clearance, and full sensor compatibility to your 3rd Gen Toyota Tundra. Engineered to retain the functionality of Toyota Safety Sense (TSS), parking sensors, and the front-mounted camera, this bumper integrates seamlessly with modern tech while adding rugged protection. All bull bar options are TSS-compatible; low and mid-height bars may appear in the camera view but won’t fully obstruct visibility. Some trucks may require TSS recalibration at a Toyota dealership after installation.\u003c\/p\u003e\n\u003cp\u003eLighting is fully integrated, with cutouts designed to fit a 40″ single-row light bar (Baja Designs S8 recommended) and provisions for two pairs of Baja Designs Squadron fog lights. LP9s fit all bull bar options except the low bar. OE fog lights cannot be reused.\u003c\/p\u003e\n\u003cp\u003eThe bumper ships with a steel skid plate to replace the factory plastic version and includes provisions to reattach the factory fender liners. Installation requires trimming the plastic bumper panels under the headlights and fender flare ends, with a detailed video provided for guidance. Correct orientation of the sensors and a level truck stance are recommended to ensure proper sensor performance.\u003c\/p\u003e\n\u003cp\u003eBuilt from 3\/16″ laser-cut P\u0026amp;O steel with 1\/4″ mounting and winch plates, this bumper is reinforced with fully welded 3\/4″ D-ring tabs and .120 wall HREW tubing. It fits most 8k-12k winches (synthetic rope with hawse fairlead recommended) but is not compatible with the Smitty XRC 12k. Unless you select the powder-coated option, the bumper must be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826273435805,"sku":"1400-3222-NB","price":1844.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Low-Height Bull Bar","offer_id":47826273468573,"sku":"1400-3222-LB","price":1944.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar w\/Tube Gussets","offer_id":47826273501341,"sku":"1400-3222-MHG","price":2054.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826273534109,"sku":"1400-3222-NB-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Low-Height Bull Bar","offer_id":47826273566877,"sku":"1400-3222-LB-01NA","price":2199.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar w\/Tube Gussets","offer_id":47826273599645,"sku":"1400-3222-MHG-01NA","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTundraHybridFrontBumperCover.jpg?v=1775887804"},{"product_id":"tundra-lo-pro-winch-bumper-3rd-gen-2022","title":"Tundra Lo-Pro Winch Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eThe 3rd Gen Tundra Lo-Pro Winch Bumper delivers a sleek, low-profile upgrade that blends rugged durability with full factory feature functionality. Engineered to retain Toyota Safety Sense, parking sensors, and the front-mounted camera, this bumper ensures you keep all your driver-assist features intact while gaining serious off-road capability. It’s designed to house a pair of Baja Designs S2 lights and includes provisions for a 20-inch Baja Designs S8 light bar, mounting cleanly into the top of the bumper\/lower grille opening for powerful forward lighting.\u003c\/p\u003e\n\u003cp\u003eBuilt from 3\/16-inch laser-cut P\u0026amp;O steel with 1\/4-inch thick mounting plates, the Lo-Pro bumper is both lightweight at just 73 pounds and exceptionally strong. Standard 3\/4-inch D-ring tabs are fully welded front and back, providing dependable recovery points. It accommodates most 8k-12k winches, with best performance achieved using synthetic rope and a hawse-style fairlead. Some roller fairleads may not fit the recessed mount. Installation requires trimming the center section of the factory bumper cover, but the result is a clean, integrated fit that maximizes clearance.\u003c\/p\u003e\n\u003cp\u003eUnless ordered with the optional powder coat, the bumper will need to be painted or powder coated before installation to prevent rust. Designed for strength, function, and a streamlined look, the Tundra Lo-Pro Winch Bumper is the perfect balance of trail performance and everyday utility.\u003cbr\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw","offer_id":47826273665181,"sku":"1422-10200","price":899.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat","offer_id":47826273697949,"sku":"1422-10200-01NA","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTundraLoProFrontBumperCover.jpg?v=1775887805"},{"product_id":"tundra-overland-series-front-bumper-2007-2013","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eThe 2nd Gen Tundra Overland Series Front Bumper is engineered for serious off-road performance with improved approach angles, extra tire clearance, and the strength to handle demanding trails. Constructed from 3\/16-inch laser cut P\u0026amp;O steel with 3\/8-inch thick mounting plates and a 1\/4-inch winch plate, this bumper is built to take abuse. Fully welded 3\/4-inch D-ring recovery tabs are standard, ensuring dependable pull points, while the .120 wall 1-3\/4-inch HREW tubing bull bar option provides added front-end protection.\u003c\/p\u003e\n\u003cp\u003eDesigned to accommodate most 8,000-12,000 lb winches, the bumper features a recessed fairlead mount optimized for synthetic rope and hawse-style fairleads. Some winches with integrated control boxes may require minor trimming of the grille support brackets. Popular models like the ComeUp, Smittybilt X20, Warn Zeon, and VR Series are known to fit. The bumper also integrates seamlessly with TRD Pro and aftermarket skid plates for complete underbody protection.\u003c\/p\u003e\n\u003cp\u003eLighting options are built-in: it’s designed for a 30-inch single-row light bar (ideal for the Baja Designs S8, with compatibility for Extreme LED 30″ 5D and RIGID SR series) and comes pre-drilled for a pair of Baja Designs LP6 or LP9 lights. These top mounts work with either a full-height bull bar or a no-bull-bar setup, giving you flexibility to match your build. OEM parking sensor provisions are included, maintaining factory safety features.\u003c\/p\u003e\n\u003cp\u003eWeighing 165 lbs without the bull bar and 180 lbs with, this bumper balances strength with manageable weight. Unless the powder coat option is selected, it will need to be painted or coated prior to installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826273730717,"sku":"1400-3107-30-NB","price":1773.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826273763485,"sku":"1400-3107-30-MH","price":1850.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826273796253,"sku":"1400-3107-30-FH","price":1963.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826273829021,"sku":"1400-3107-30-NB-01NA","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826273861789,"sku":"1400-3107-30-MH-01NA","price":2099.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826273894557,"sku":"1400-3107-30-FH-01NA","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenEarlyTundraOverlandFrontBumperCover.jpg?v=1775887806"},{"product_id":"tundra-overland-series-front-bumper-2014","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUpgrade your 2014–2021 Toyota Tundra with the Overland Series Front Bumper, engineered for serious off-road functionality and rugged durability. Designed to improve clearance and approach angles, this bumper makes it easier to fit larger tires, giving your Tundra the performance edge and aggressive stance needed for demanding trails. Constructed from 3\/16″ laser-cut P\u0026amp;O steel, with beefy 1\/4\" thick mounting and winch plates, it’s built to handle harsh conditions without compromise.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eStandard 3\/4″ thick D-ring recovery points are fully welded front and back, providing dependable strength when it matters most. The bumper includes a bull bar made from .120 wall 1 3\/4″ HREW tubing, available in full-height or mid-height configurations. The full-height option retains TSS (Toyota Safety Sense) functionality with TRD Pro grilles only, while the mid-height version ensures compatibility across all models.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWinch-ready and fits most 8k-12k winches, including popular models from ComeUp, Warn, and Smittybilt, this bumper features a recessed fairlead mount ideal for synthetic rope and hawse-style fairleads. (Roller fairleads may not fit.) Designed with versatility in mind, it integrates cleanly with TRD Pro and aftermarket skid plates and includes holes for factory parking sensors.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA recessed cutout allows for the installation of a 30″ single-row light bar, specifically designed for the Baja Designs S8, but also compatible with options from Extreme LED and RIGID. Unless you opt for the powder-coated finish, the bumper will require painting or powder coating before install to ensure rust protection. Rugged, functional, and built for overland adventures. This bumper is the perfect front bumper solution for your 2nd Gen Tundra.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826273960093,"sku":"1400-3114-30-NB","price":1809.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar","offer_id":47826273992861,"sku":"1400-3114-30-MH","price":1886.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826274025629,"sku":"1400-3114-30-FH","price":1999.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826274058397,"sku":"1400-3114-30-NB-01NA","price":2059.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar","offer_id":47826274091165,"sku":"1400-3114-30-MH-01NA","price":2159.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets","offer_id":47826274123933,"sku":"1400-3114-30-FH-01NA","price":2259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/2ndGenTundraOverlandFrontBumperCover.jpg?v=1775887808"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2023","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Overland Series Front Bumper for the 3rd Gen (2022–2025) Tundra delivers rugged off-road performance while maintaining full compatibility with Toyota Safety Sense, parking sensors, and the front-mounted camera. All bull bar configurations work with TSS, though low- and mid-height bars will appear in the camera’s view without obstructing it fully. A TSS recalibration may be required after installation, as sensor relocation can occasionally trigger the system to request adjustment. For optimal sensor performance, C4 Fabrication recommends a level truck stance, as excessive forward rake may cause increased sensitivity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEngineered for both durability and function, this bumper is built from 3\/16″ laser-cut P\u0026amp;O steel with 1\/4″ thick mounting and winch plates, plus fully welded 3\/4″ thick D-ring tabs. The bull bar is made from .120 wall HREW tubing in 1 3\/4″ and 1 1\/2″ diameters for strength and impact resistance. Designed to house a 40″ single-row light bar (specifically the Baja Designs S8) and one pair of Baja Designs Squadron fog lights, the bumper also accommodates LP9 lights on all options except the low bar, but they will not be pre-drilled. Integrated light cutouts come standard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe bumper fits most 8k-12k winches, with WARN VR and ZEON series confirmed to fit, and performs best with synthetic rope and a hawse-style fairlead. It includes a steel front skid plate to replace the factory plastic version, provisions to reattach factory fender liners, and requires minor trimming of bumper panels and fender flares for installation. Available in multiple bull bar configurations: no bar (160 lbs), low bull bar (168 lbs), mid-height with gussets (174 lbs), and full bull bar with headlight hoops (182 lbs). This bumper blends heavy-duty strength, clean fitment, and sensor-friendly design for the ultimate overland upgrade. Unless ordered with the powder-coated finish, painting or coating is required before installation to prevent rust.\u003c\/span\u003e\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar","offer_id":47826274156701,"sku":"1400-3122-NB","price":1994.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Low-Height Bull Bar","offer_id":47826274189469,"sku":"1400-3122-LB","price":2094.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar w\/Tube Gussets","offer_id":47826274222237,"sku":"1400-3122-MHG","price":2194.0,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826274255005,"sku":"1400-3122-FHH","price":2354.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar","offer_id":47826274287773,"sku":"1400-3122-NB-01NA","price":2259.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Low-Height Bull Bar","offer_id":47826274320541,"sku":"1400-3122-LB-01NA","price":2359.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar w\/Tube Gussets","offer_id":47826274353309,"sku":"1400-3122-MHG-01NA","price":2459.0,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Headlight Hoops","offer_id":47826274386077,"sku":"1400-3122-FHH-01NA","price":2659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/3rdGenTundraOverlandFrontBumperCover.jpg?v=1775887810"},{"product_id":"6th-gen-4runner-low-profile-winch-bumper","title":"6th Gen 4Runner Low Profile Winch Bumper","description":"\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 10px; margin: 14px 0 18px;\"\u003e\n\u003ca rel=\"noopener noreferrer\" class=\"btn btn--primary\" href=\"https:\/\/dissentoffroad.com\/pages\/lead-times\" target=\"_blank\"\u003e Current Lead Times \u003c\/a\u003e \u003ca rel=\"noopener noreferrer\" class=\"btn btn--primary\" href=\"https:\/\/dissentoffroad.com\/pages\/install\" target=\"_blank\"\u003e Installation Guides \u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cmeta charset=\"utf-8\"\u003eIntroducing the all-new Dissent Off-Road Low Profile Winch Front Bumper for the 6th Generation Toyota 4Runner—purpose-built for those who demand both function and style on every adventure. Engineered as the most feature-packed option on the market, this bumper seamlessly integrates winch support, multiple lighting configurations, and a sleek low-profile design that complements the 4Runner’s bold new look. Whether you’re tackling remote trails or outfitting your rig for overland travel, Dissent’s latest innovation delivers the protection, capability, and premium craftsmanship you need to explore with confidence. Includes black powder coat.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e3\/16\" steel construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eRecessed recovery points that don't stick out\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eChamfered recovery points for soft shackle use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eSupports 2\" fog lights like Baja Designs S2 or Rigid SR-M\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eHiLift Jack ready, provision for lifting the vehicle from the bumper itself\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eWinch-ready, fits most 8.5-12.5k winches\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eWinch clutch access and line feed viewing slots\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eIncludes Core Support Bracket so factory plastic bumper won't flap at speed\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eCore Support Bracket includes slots for mounting up to two sets of pod lights behind the grill\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh-quality black powder coat included\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e100% designed, engineered, and manufactured in the USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eComes with a high-quality Grade 8\/Grade 10.9 hardware kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cmeta charset=\"utf-8\"\u003eCompatible with factory TRD skid plates\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eBumper only adds 17lbs (39lbs of parts are removed)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e* Light options shown in images *\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBaja Designs:\u003c\/span\u003e\u003cbr\u003e2x \u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/dissentoffroad.com\/products\/s2-sae-pair-led-spot-baja-designs?variant=45070095155396\" target=\"_blank\"\u003eS2 SAE Amber\u003c\/a\u003e\u003c\/strong\u003e - (Fog lights in Bumper) \u003cbr\u003e4x \u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/dissentoffroad.com\/products\/6th-gen-4runner-s2-sae-fog-light-kit\" target=\"_blank\"\u003eS2 SAE Clear\u003c\/a\u003e\u003c\/strong\u003e - (High Beam Assist in-Grille Panel) \u003cbr\u003e(Bumper provides mounting tabs behind upper grille panel)\u003cbr\u003e4x \u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/dissentoffroad.com\/products\/squadron-pro-black-led-auxiliary-light-pod-pair-baja-designs\" target=\"_blank\"\u003eS4 Squadron Pro\u003c\/a\u003e\u003c\/strong\u003e - (Behind the Grille) \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" class=\"btn btn--primary\" href=\"https:\/\/dissentoffroad.com\/pages\/winches-and-recovery\" target=\"_blank\"\u003e Winches \u0026amp; Recovery Guide \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWinch Recommendations\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWinch recommendations are based on clearance, control box configuration, and compatibility with each bumper design.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eComeUp SOLO Trail Editions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e291689 – SOLO 9.5rs Trail Edition\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e291508 – SOLO 12.5rs Trail Edition\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe SOLO Trail Editions are the largest and most robust winches in this category. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eTheir size and construction make them ideal for demanding recovery use, but they also require significantly more space.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb data-stringify-type=\"bold\"\u003e\n  \n  \u003cbr\u003eWinch Fitment Notice:\u003c\/b\u003e\u003cbr aria-hidden=\"true\"\u003e Winch designs and control box configurations vary by brand and model year. Some winches may require control box relocation, reorientation, or custom mounting to achieve proper hood and bumper clearance. While we offer relocation solutions for Come up \"Slim\" winch models, not all winches are supported. Fitment may require customer-supplied modifications or extensions.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Dissent Offroad","offers":[{"title":"Default Title","offer_id":47827312050333,"sku":"DS-T4R6G-LPWB-501-ST","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/4747\/9197\/files\/Stellar_Built_6G_front02.jpg?v=1775944331"}],"url":"https:\/\/truautomotive.com\/collections\/front-bumpers.oembed?page=3","provider":"TRU Automotive","version":"1.0","type":"link"}